$92.99
18 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Superlative Arms .936" Clamp-On Adjustable Gas Block is one of the more clever pieces of AR hardware you can bolt onto a heavy-profile barrel. Where a typical adjustable block restricts gas flow to slow things down, this one uses a patented Bleed Off design that vents excess gas forward, out the front of the block. The upside is real: your rifle only uses the pressure it needs to cycle the bolt, and the leftover gas gets dumped rather than shoved back through the action. That means less heat, less fouling, and noticeably softer recoil for faster follow-up shots.
Because the adjustment screw doesn't sit in the gas path, you avoid the two headaches that plague restriction-style blocks: screw erosion and carbon seizing the detent. The adjustment detent lives outside the block, so it stays clean and clicks predictably every time. Superlative also built in an anti-loss feature so you won't accidentally back the screw all the way out while tuning. Worth noting, the block runs in two modes. Bleed Off is great for reducing blowback on suppressed and SBR builds, while restriction mode tends to be the quieter, simpler choice if you shoot the same setup all the time.
This version is machined from 416 stainless steel and finished in black Melonite (QPQ) for solid wear and corrosion resistance under sustained heat. The .936" journal size is made for large-profile barrels commonly found on AR-10 and precision 5.56 builds, and it works across pistol, carbine, mid-length, and rifle-length gas systems. The clamp-on mount is a favorite among builders who prefer even, repeatable clamping pressure over set screws digging into the barrel. At right around 1.84 oz and 1" long, it tucks under most free-float handguards with room to spare.
Tuning is straightforward with a little range time. Start closed, then open it up click by click until the bolt locks back reliably on an empty mag, then add a click or two of cushion. Keep a note of your final setting and the ammo you used, because that record makes life easy down the road. Whether you're chasing a mellow suppressed build or a competition rifle that shoots flat, this block gives you the control to get there.
Most adjustable blocks work by restricting gas flow to slow the action down. The Superlative Arms block instead vents the excess gas forward, out the front of the block, so only the pressure needed to cycle the bolt gets used. This keeps the system running cooler and cleaner, and because the adjustment screw isn't sitting in the gas path, you don't deal with carbon seizing or screw erosion.
In most cases, yes. At 1" long and low-profile in shape, it slides under the majority of free-float handguards without issue, and builders have fit it under rails as tight as 1.3" inside diameter. If you're running a slim handguard, double check the inside diameter against the block dimensions before ordering.
Both work, and it comes down to your setup. Bleed Off mode shines on suppressed and SBR builds where you want to cut blowback to the face, though it can produce some port pop from the vented gas. Restriction mode tends to be quieter and simpler to tune if you shoot the same rifle and ammo most of the time. If you go the restriction route, a dab of anti-seize on the threads is smart.
Leave the handguard off and install the muzzle device you plan to run. Start with the block closed, then open it up in small increments while firing single rounds until the bolt locks back reliably on an empty magazine, then add a click or two of margin. Write down your final setting and the ammo you used so you can return to it later.
| UPC | 850011846124 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SABO-DI-936CM |
| Style | Adjustable |
You must be logged in to post a review.
Reviews
There are no reviews yet.