$279.99
Out of stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Piston conversions used to mean picking one load, dialing it in, and living with it. The Superlative Arms Adjustable Piston System takes a smarter path. Instead of choking down gas flow like most adjustable blocks, its patented Bleed Off design vents extra gas forward and out of the block, away from you and the receiver. The system only keeps the pressure it needs to cycle the bolt carrier, so the whole gun runs cleaner, cooler, and with less felt recoil. This is the right-hand, carbine-length version built around a solid .750" gas block for barrels with a matching journal.
The 30-position adjustment gives you real, repeatable control. Dial it wide open for a stubborn low-power load, then close it down when you thread on a can to knock back blowback. The adjustment detent sits outside the block where carbon can't foul it, and the gas screw doesn't restrict flow, so you won't fight erosion, seizing, or lost clicks over time. There's also a built-in stop so you don't accidentally back the screw all the way out during tuning.
The gas block is machined from 416 stainless with a Melonite finish, and the internal spring is heat-treated Inconel that shrugs off the temperature and pressure of hard use, including full-auto rated duty. The one-piece DLC-coated piston carrier runs with anti-tilt skids and a dimpled key that centers the op rod on every strike, while the H-13 tool steel op rod is nitrided for durability. The whole package stays low profile, tucking neatly under most handguards.
First-time installation takes patience and roughly half an hour, and the solid set-screw block requires dimpling the barrel for the lowest-profile fit. Superlative includes a measuring ruler so you can confirm your gas port location matches the op rod length before you build, which is critical since there's no industry standard for that measurement. Do that homework up front and you'll end up with a smoother, cleaner-running rifle that eats a wide range of ammo without a fuss.
No. The kit includes the piston carrier but not the bolt assembly, meaning the bolt, cam pin, firing pin, and firing pin retainer are sold separately. You can reuse the bolt from your existing bolt carrier group in most cases. Plan on sourcing a bolt if you don't already have one on hand.
Most adjustable blocks work by restricting gas flow, which can lead to carbon buildup, erosion, and screws that seize up over time. Superlative's patented Bleed Off design instead vents the excess gas forward and out of the block, keeping only what's needed to cycle the carrier. That means cleaner, cooler operation and an adjustment detent that stays outside the fouling zone.
This version is built for barrels with a .750" gas block journal running a carbine-length gas port. Because there's no universal standard for gas port location, use the included measuring ruler to confirm your port lines up with the op rod length before installing. The solid set-screw block also calls for dimpling the barrel for the most secure, lowest-profile fit.
Yes, and it's one of the main reasons people choose it. When you run a suppressor, the bleed-off port lets you vent the excess pressure that normally causes blowback and over-gassing. Dial in the 30-position adjustment for a smoother, cleaner suppressed experience without swapping parts.
| UPC | 850011846179 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SABO-PS-RFD-C750SM |
You must be logged in to post a review.
Reviews
There are no reviews yet.