Description
Running a red dot or LPVO on an AR usually means your eye sits higher than the stock comb wants it to, and that gap turns into a floating cheek weld and slower target acquisition. The B5 Systems Accessory Cheek Piece closes that gap. It clips onto any variant of the B5 Collapsible Precision Stock using the machined undercuts along the comb, adding 3/8 inch of height so your face lands in the same spot every time you shoulder the rifle.
How the B5 Accessory Cheek Piece Locks In
Mounting is about as simple as it gets. The piece press-fits into the undercut slots on the CPS comb, and once it's seated there's no wobble or rattle to fight. It also slides horizontally along those slots, so you can shift it forward or back to match where your face naturally falls on the stock. That fore-aft tweak matters more than people expect, since everyone's neck length and shooting stance puts their cheek in a slightly different place.
Built From the Same Mil-Spec Playbook
B5 leans hard on function over flash, and this cheek piece follows that line. It's molded from the same Mil-Spec grade polymer the brand uses across its stock lineup, finished in black to match, and topped with a soft overmold that stays comfortable even after a long string of fire. At roughly 2 ounces it won't throw off the balance of your build, and it holds its adjustment once you set it.
Getting Your Cheek Weld Dialed
This is the taller of B5's two cheekpiece options, adding 3/8 inch versus the standard 3/16 inch riser, which makes it the better pick when you're running a higher optic mount or a magnified scope. Pair it with the height and length-of-pull adjustments already built into the Collapsible Precision Stock and you can fine-tune your position until the sight picture comes up fast and repeatable, shot after shot.
Key Specifications
- Manufacturer: B5 Systems
- Manufacturer Part Number: CPS-1437
- UPC: 814927022911
- Color: Black
- Height Added: 3/8 inch
- Adjustment: Vertical height plus horizontal position
- Compatibility: All B5 Collapsible Precision Stock (CPS) variants
- Material: Mil-Spec polymer with soft overmold
- Weight: 2.0 oz
- Length: 4.50 in
- Width: 2.43 in
- Country of Origin: USA
What’s Included
- B5 Systems Accessory Cheek Piece (CPS-1437)
Frequently Asked Questions
What stocks does the B5 Systems Accessory Cheek Piece fit?
It's designed to fit every variant of the B5 Collapsible Precision Stock (CPS), including the short, medium, and long versions. It seats into the machined undercut slots along the comb of the stock, so it won't fit stocks that lack those mounting cuts. If you're running a B5 CPS, this is the matching riser.
How much height does this cheek piece add?
This is the ACP model, which adds 3/8 inch of comb height. That's double the standard B5 cheekpiece, which only adds 3/16 inch. The taller rise is the better choice when you're running a higher optic mount or a magnified scope that pulls your eyeline up.
Is the B5 cheek piece adjustable once it's mounted?
Yes. Beyond the fixed height it adds, the piece slides horizontally in the stock's undercut slots so you can move it forward or back. That lets you position it exactly where your cheek naturally lands, which makes a real difference for a consistent, repeatable weld.
Does it require tools to install?
No tools needed. The cheek piece press-fits into the undercuts on the CPS comb and locks in place. Setting the horizontal position is just a matter of sliding it along the slots to your preferred spot.





Reviews
There are no reviews yet.