Description
The Apex Flat Face Forward Set Trigger Kit is one of the most popular upgrades you can make to a polymer frame M&P M2.0, and for good reason. Where the factory trigger has a fair amount of slack and a mushy break, this kit moves the striker release point forward and lets an integrated over-travel stop control where the trigger stops. The result is a shorter, cleaner pull that finally does the platform justice. When everything is installed together, expect the pull weight to drop by around 2 pounds, overall travel to shrink by roughly 40 percent, and the reset to come back short and positive.
What the Forward Set Trigger Kit Does to Your M&P M2.0
The flat face profile gives you a consistent finger placement and a break that feels more like a single action 1911 than a striker gun. The trigger body is machined aluminum with a center mounted pivoting safety, so it keeps the factory safety function intact. This isn't just a spring swap. You're getting the Apex trigger, a forward set sear actuator, a fully machined sear, an Ultimate Striker Block, and a full spring set that lets you dial in the feel you want.
Tuning the Apex Trigger Kit for Carry or Competition
The included springs are where the flexibility comes in. Mixing the Apex springs with the factory sear and trigger return springs lets you set the pull weight anywhere from a duty and carry range down to a lighter competition pull, roughly in the 3.3 to 5.5 pound window depending on which combination you run. Weekend USPSA and IDPA folks love it, and it's just as at home on a range gun.
Fit and Installation Notes for the M&P M2.0
This kit is a direct drop in with no fitting required, and Apex has drop tested it across the sizes and configurations it's rated for. It covers polymer frame M&P M2.0 pistols in 9mm, .40 S&W, 10mm, and .45 ACP, including Full Size, Compact, and Subcompact. It is not made for the Shield, Shield M2.0, the original M&P, or the M2.0 Metal frame guns. If you're comfortable field stripping and following the Apex install video, most people knock this out at the bench in an afternoon.
Key Specifications
- Manufacturer: Apex Tactical Specialties Inc.
- Manufacturer Part Number: 10027BLK
- Model: Flat Face Forward Set
- UPC: 850053063084
- Style: Drop-In Trigger Kit
- Trigger Face: Flat
- Trigger Material: Machined Aluminum
- Color: Black
- Fit: S&W M&P M2.0 Polymer Frame (9mm, .40 S&W, 10mm, .45 ACP)
- Compatible Sizes: Full Size, Compact, Subcompact
- Adjustable Pull Weight: Approx. 3.3 to 5.5 lbs depending on springs
- Pull Weight Reduction: Approx. 2 lbs
- Travel Reduction: Approx. 40%
- Safety: Center mounted pivoting trigger safety
- Installation: Direct drop-in, no fitting required
What’s Included
- Aluminum Flat-Faced Forward Set Trigger
- Forward Set Sear Actuator
- 2-Dot Fully Machined Sear
- Heavy Duty Sear Spring
- Duty/Carry Sear Spring
- Light Sear Spring
- Apex Sear Plunger
- Heavy Duty Trigger Return Spring
- Duty/Carry Trigger Return Spring
- Ultimate Striker Block
- Striker Block Spring
- Slave Pin
Frequently Asked Questions
Will this Apex Forward Set Trigger Kit fit my M&P M2.0?
It's built for polymer frame M&P M2.0 pistols in 9mm, .40 S&W, 10mm, and .45 ACP, covering Full Size, Compact, and Subcompact models. It is not made for the Shield, Shield M2.0, the original first generation M&P, or the M2.0 Metal frame guns. If you have one of the standard polymer M2.0 pistols, you're good to go.
How light can I set the trigger pull with this kit?
By mixing the included Apex springs with your factory sear and trigger return springs, you can tune the pull anywhere from a duty and carry range down to a lighter competition weight, roughly 3.3 to 5.5 pounds depending on the combination. Overall you can expect around a 2 pound reduction from stock. That flexibility is a big part of why this kit is so popular across both carry and match use.
Do I need a gunsmith to install the Forward Set Trigger Kit?
No, this is a direct drop-in with no fitting required. Most people who are comfortable field stripping their M&P and following the Apex installation video can handle it at the bench. Take your time on the sear and striker block work, and keep the pistol unloaded with ammo out of your work area.
Does this trigger kit keep the factory safety?
Yes. The Apex trigger uses a center mounted pivoting safety, so it maintains the factory safety function while giving you the improved feel. The kit has also been drop tested across the sizes and configurations it's rated to fit.




Reviews
There are no reviews yet.