Description
The stock M&P M2.0 trigger gets the job done, but it leaves a lot of room to improve. Apex built this Poly Flat-Faced Forward Set kit to fix the two things people gripe about most: the long, mushy take-up and the vague reset. The heart of it is the patented Forward Set Sear Actuator, which moves the striker release point forward and lets the flat-faced trigger's over-travel stop control where the press ends. The result is a trigger that feels tighter, breaks cleaner, and gets back into the fight faster.
What the Apex Forward Set Kit Actually Does to Your M2.0
With everything installed together, this kit reduces overall trigger travel by about 40% and shaves roughly 2 pounds off the factory pull weight. You also get a shorter reset and less pre-travel and over-travel across the board. The flat face gives you consistent finger placement and a straight-back press, which is why so many people notice better trigger control the first time out. The center-mounted pivoting safety keeps factory safety values intact, so you're not giving anything up to gain the smoother feel.
Tuning the Poly Flat-Faced Forward Set Trigger to Your Setup
One of the smarter parts of this kit is the spring selection. Apex includes heavy-duty and duty/carry sear springs plus matching trigger return springs, and by mixing Apex springs with your factory springs you can set the pull weight anywhere from a duty or carry range down to something lighter for competition. Add in the Ultimate Striker Block, which smooths out the take-up, and you've got a fire control setup that punches well above a bolt-on part.
Fitment and Install Notes for the M2.0 Trigger Kit
This one fits polymer-frame M&P M2.0 pistols in 9mm, .40 S&W, and .45 ACP, including full-size and compact models. It does not fit the original M&P, any M&P Shield, or the metal-frame M2.0 like the Competitor. It's designed as a drop-in job, but plenty of folks lean on the Apex YouTube walkthrough or hand it to an armorer to get it dialed right. Take your time, follow the video, and it's a very doable afternoon project.
Key Specifications
- Manufacturer: Apex Tactical Specialties Inc.
- Manufacturer Part Number: 100-P154-B
- UPC: 854751007418
- Model: M&P M2.0
- Fits: Polymer-frame S&W M&P M2.0 (9mm, .40 S&W, .45 ACP)
- Trigger Shape: Flat-Faced Forward Set
- Trigger Material: Polymer body with machined metal components
- Color: Black
- Product Type: Trigger Kit
- Style: Kit
- Pull Weight Reduction: Approximately 2 lbs
- Travel Reduction: Approximately 40%
- Safety: Center-mounted pivoting trigger safety
- Installation: Drop-in, armorer or gunsmith recommended
What’s Included
- Apex Polymer Flat-Faced Forward Set Trigger
- Apex Forward Set Sear Actuator
- Apex Fully Machined 2-Dot Sear
- Apex Heavy Duty Sear Spring
- Apex Duty/Carry Sear Spring
- Apex Heavy Duty Trigger Return Spring
- Apex Duty/Carry Trigger Return Spring
- Apex Ultimate Striker Block Kit (striker block, spring, and Talon Tactical Tool)
- Apex Slave Pin
Frequently Asked Questions
Will this Apex Forward Set kit fit my M&P M2.0?
It fits polymer-frame S&W M&P M2.0 pistols chambered in 9mm, .40 S&W, and .45 ACP, in full-size and compact sizes. It will not fit the original M&P, any M&P Shield or Shield M2.0, or the metal-frame M2.0 models like the Competitor. If you're unsure about a specific configuration, it's worth confirming your frame is polymer before ordering.
How much does the trigger pull actually improve?
With the full kit installed together, you're looking at roughly a 2-pound drop in pull weight and about 40% less overall trigger travel compared to stock. You also get a shorter reset and reduced pre-travel and over-travel. The flat face helps with consistent finger placement, which most people feel right away at the range.
Can I adjust the trigger pull weight with this kit?
Yes, and that's one of the best parts. The kit comes with heavy-duty and duty/carry sear and trigger return springs, so by combining Apex springs with your factory springs you can set the pull anywhere from a carry-appropriate weight down to a lighter competition feel. That flexibility lets one kit cover a lot of different uses.
Is the Apex M2.0 trigger kit hard to install?
It's built as a drop-in kit and doesn't require additional gunsmithing, though Apex recommends an armorer or trained gunsmith handle it. Plenty of hands-on owners install it themselves using the Apex step-by-step video, and the included slave pin makes seating the trigger return spring easier. If you're not comfortable working inside the fire control group, having a smith do it is money well spent.





Reviews
There are no reviews yet.