Description
When you run a red dot or a can on your Glock, factory sights disappear behind the optic and leave you without a backup. The AmeriGlo GL507 solves that with a 5XL tall profile that raises the sight plane high enough to co-witness through slide-mounted optics and clear most suppressors. It's built to sit inside your window as a dependable set of irons for the day your dot decides to quit on you.
What Sets the GL507 Apart
This set pairs a serrated black front blade with a flat black rear, both finished in black for a clean, no-nonsense look. The serrated front face cuts glare and helps your eye settle quickly, while the blacked-out rear keeps your focus on the front sight and the dot instead of competing dots or outlines. Front blade height runs .407 inches with an overall rear height of .507 inches, putting it among the tallest suppressor-height options AmeriGlo offers. That extra height is what makes the difference between an optic that blocks your irons and one that lets them ride right through the window.
Fitment and Optic Pairing for the GL507
The GL507 is machined from steel and fits Glock Gen 1 through Gen 5 models, including MOS slides, with the exception of the 42 and 43. It's cut to work with the Burris FastFire and Vortex Venom optic footprints, and folks running everything from Trijicon and Leupold red dots to MOS setups have found this height gives a solid lower 1/3 or full co-witness depending on the slide cut.
Installing the AmeriGlo GL507
Installation is straightforward with a Glock sight pusher or a proper sight tool. As with a lot of tall aftermarket sights, some users take a few thousandths off the bottom of the rear to drop it into the dovetail cleanly, so having the right tools on hand makes the job smooth. One thing worth planning for: these sit tall, so make sure your holster has the clearance for them before you head out.
Key Specifications
- Manufacturer: AmeriGlo
- Manufacturer Part Number: GL507
- UPC: 644406906476
- Style: Optic-Compatible / 5XL Tall Suppressor Height
- Fitment: Glock Gen 1-5 (except 42 and 43), including MOS
- Front Sight: Black serrated
- Rear Sight: Flat black
- Front Blade Height: .407 in. (10.34mm)
- Overall Rear Height: .507 in. (12.88mm)
- Front Blade Width: .115 in. (2.92mm)
- Frame/Material: Steel
- Finish: Black
- Optic Footprint Compatibility: Burris FastFire, Vortex Venom
What’s Included
- AmeriGlo GL507 front sight (black serrated)
- AmeriGlo GL507 rear sight (flat black)
Frequently Asked Questions
Will the GL507 co-witness with my red dot?
Yes, the 5XL tall height on the GL507 is designed to give you a co-witness through slide-mounted optics, with users reporting a solid lower 1/3 or full co-witness depending on the slide cut. It's cut for the Burris FastFire and Vortex Venom footprints. Since co-witness height depends on your exact optic and slide milling, it's smart to confirm your setup measurements before install.
Does the AmeriGlo GL507 fit my Glock?
The GL507 fits Glock Gen 1 through Gen 5 models, including MOS slides. The main exceptions are the Glock 42 and 43, which use a different sight cut. If you're running a standard or MOS Glock outside of those two, you're good to go.
Are these sights tall enough to clear a suppressor?
They are. The 5XL height is one of the tallest suppressor-height options AmeriGlo makes, and shooters running cans on Glocks report clearing over the top of their suppressor with a clean sight picture. Threaded barrel and suppressor combos vary, so confirm your can's diameter if you want a precise over-the-top sight line.
How do I install the GL507 sight set?
You'll want a Glock sight pusher or a dedicated sight installation tool for the rear, plus a front sight tool for the front screw. Some users take a few thousandths off the bottom of the rear sight so it drops into the dovetail cleanly, which is common with tall aftermarket sights. One heads-up: these sit tall, so double-check that your holster gives them enough clearance.





Reviews
There are no reviews yet.