Description
Anyone who has run a bone-stock AR-15 trigger knows the drill: gritty takeup, a mushy break, and a reset that feels like it is dragging across sandpaper. The ALG Defense Quality Mil-Spec (QMS) trigger fixes the feel without messing with the reliability that makes a mil-spec trigger the standard in the first place. It is a single-stage, curved-bow trigger that drops right in with the usual two-pin install, and it is tuned by the folks at Geissele Automatics.
What Sets the QMS Apart From a Stock Trigger
The smoother pull comes from honing the sear surfaces without cutting into the metal below the stock surface finish, so you get a cleaner break while the sear geometry stays true to spec. That is the key detail here. Because the geometry is unchanged, the reliability an AR trigger is known for carries over completely. Pull weight lands around 6.5 lbs, which sits above the M4/M16 minimum of 5.5 lbs and nowhere near the 9.5 lb upper end. It is not a competition-light trigger and was never meant to be, but plenty of builders find the break crisp enough that it just gets better as it wears in.
Built With Real Mil-Spec Materials
This is not a bargain-bin part dressed up in mil-spec language. The trigger and hammer are true 8620 alloy steel castings, correctly carburized, quenched, and tempered for hard, durable surfaces. A full-force hammer spring gives you positive ignition across whatever ammo you feed it, and the corrosion-resistant springs meet military specs. The trigger and hammer pins are upgraded from stock mild steel to quenched-and-tempered 4140 chrome-moly, centerless ground about 0.001 inch larger than stock to tighten up play while still dropping in as a slip fit.
Who the ALG QMS Trigger Is Built For
This is a smart pick for a duty gun, a truck rifle, or that first build where you want a genuine step up from the generic trigger in a lower parts kit. It fits AR-15 and AR-10 pattern receivers, shares parts commonality with stock triggers, and keeps installation and maintenance exactly the same. If you want a reliable, no-drama trigger that punches well above what the price tag suggests, the QMS earns its spot.
Key Specifications
- Manufacturer: ALG Defense
- Manufacturer Part Number: 05-198
- UPC: 854014005205
- Platform: AR-15 / AR-10
- Trigger Type: Single Stage
- Trigger Bow: Curved
- Pull Weight: Approx. 6.5 lbs
- Style: Non-Adjustable
- Installation: Drop-in, 2-pin
- Trigger/Hammer Material: 8620 alloy steel castings
- Pins: 4140 chrome-moly, quenched and tempered
- Color: Black
- Tuned By: Geissele Automatics
What’s Included
- ALG Defense QMS single-stage trigger
- Hammer
- Disconnector
- Trigger and hammer pins
- Springs
Frequently Asked Questions
What is the pull weight on the ALG Defense QMS trigger?
The QMS generally runs about 6.5 lbs. That keeps it above the M4/M16 minimum of 5.5 lbs and well under the 9.5 lb upper limit. It feels smoother and cleaner than a stock trigger even though the weight is in the same ballpark.
Will the QMS trigger fit both AR-15 and AR-10 rifles?
Yes. It works with standard AR-15 and AR-10 pattern lower receivers and installs as a simple two-pin, drop-in unit. If your receiver takes a mil-spec fire control group, the QMS drops right in.
Is the ALG QMS a drop-in trigger or does it need gunsmithing?
It is a straightforward drop-in with the usual two-pin install, no gunsmithing required. Because the sear geometry is unchanged from standard, maintenance and installation are the same as any mil-spec trigger. Basic AR trigger install knowledge is all you need.
How is the QMS different from ALG's ACT trigger?
The QMS keeps a true mil-spec pull around 6.5 lbs with sear surfaces honed for a smoother feel while leaving the geometry stock. The ACT is a step up with a lighter, crisper feel, so the QMS is the pick when you want a genuine but subtle improvement over a stock trigger at a lower price point.




Reviews
There are no reviews yet.