Description
Thermal clip-ons are great in front of a day scope, but there are plenty of times you just want to scan a field, pick up heat signatures, or find an animal before you ever get behind the rifle. That's exactly what this AGM eyepiece is built for. It threads onto the rear of your AGM Rattler-C V2 clip-on and, with a quick switch to monocular mode, lets you run the unit handheld as a dedicated thermal monocular.
Installation is about as straightforward as it gets. You align the eyepiece with the rear threaded portion of the clip-on and rotate it clockwise until it's seated and snug. From there, you set the device to Monocular Mode in the menu, and the interface switches over to match. The ring closest to your eye handles diopter adjustment, so you can dial in a sharp picture for your own vision before you start glassing.
Why the AGM Eyepiece Earns a Spot in Your Pack
The big draw here is versatility. Instead of carrying a separate thermal monocular for spotting and a clip-on for your rifle, you run one unit that does both. For walking the property, scanning for hogs or predators, or general after-dark observation, pulling the clip-on off the scope and converting it to a handheld monocular keeps your kit lighter and your setup simpler.
Fit and Compatibility for the Rattler-C V2 Eyepiece
This eyepiece is designed for the AGM Rattler-C V2 thermal clip-on systems and the Secutor-C LRF. It's a compact, rubber-bodied accessory that adds minimal bulk and threads on without any special tools. Keep in mind this is the eyepiece accessory only, meant to pair with a Rattler-C V2 or Secutor-C LRF you already own, not a complete thermal unit on its own.
If you already run a Rattler-C V2 and have been eyeing a way to use it handheld, this is the piece that makes it happen. It's a small, practical upgrade that stretches what your thermal clip-on can do in the field.
Key Specifications
- Manufacturer: AGM Global Vision
- Manufacturer Part Number: 6328XER21
- UPC: 810027776211
- Type: Eyepiece / Monocular Conversion Accessory
- Function: Converts compatible clip-on into handheld thermal monocular
- Compatibility: AGM Rattler-C V2, Secutor-C LRF
- Mounting: Threads onto rear of clip-on, no tools required
- Adjustment: Diopter adjustment via rear focus ring
- Body Material: Rubber
- Color: Black
- Warranty: 1 Year Manufacturer
What’s Included
- AGM Eyepiece for Rattler-C V2
Frequently Asked Questions
What does the AGM Eyepiece for the Rattler-C V2 do?
It converts your Rattler-C V2 thermal clip-on into a handheld thermal monocular. You thread it onto the back of the unit and switch the device to Monocular Mode, which lets you scan and spot heat signatures without mounting the clip-on in front of a day scope. It's a handy way to get two uses out of one thermal device.
How does the eyepiece install on the Rattler-C V2?
You align the eyepiece with the rear threaded part of the clip-on and rotate it clockwise until it's tightened securely. No special tools are needed. After it's on, you select Monocular Mode in the menu and use the rear ring for diopter adjustment to sharpen the image for your eye.
Is this eyepiece compatible with anything besides the Rattler-C V2?
Yes. Along with the AGM Rattler-C V2 thermal clip-on systems, it's also listed as compatible with the Secutor-C LRF. It's designed specifically for these AGM clip-on units, so it won't fit unrelated thermal devices.
Does this come with a thermal unit, or is it just the eyepiece?
This is the eyepiece accessory only. It's meant to pair with a Rattler-C V2 or Secutor-C LRF that you already own or are purchasing separately. You'll need a compatible host unit for the eyepiece to work.




Reviews
There are no reviews yet.