0
0

Forward Controls OPF-G43X/48 RMRcc Adapter Plate for Glock 43X/48

UPC: 687408648685

$76.00

Out of stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Glock 43X and 48 MOS slides come cut for the smaller Shield RMSc footprint, which means the Trijicon RMRcc will not just drop right on. It is a longer optic with its own footprint, so it needs a dedicated adapter plate to bridge the gap. That is exactly what Forward Controls Design built here, and they went further than just raising the mounting surface to make the optic fit.

Machined from 1018 steel and finished in black nitride, this plate is built to take a beating without adding much weight to your carry gun. It tips the scale at about 0.75 oz, thanks to an internal lightening cut that trims dead material from underneath while keeping the plate rigid where it counts. You would never know the cut is there once the plate is installed, since it stays hidden under the optic.

What the FCD RMRcc Plate Does Differently

Instead of the two front lug holes, this design uses larger diameter threaded posts that the sight-to-plate screws thread into, which holds the RMRcc dead still on the plate. Because the RMRcc runs longer than the 43X/48 MOS cut, the optic overhangs the slide slightly. Forward Controls positioned the optic toward the center of the plate to keep that unsupported overhang to a minimum, and the whole setup is designed so the bottom of the RMRcc sits nearly flush with the top of your slide for the lowest possible sight height.

Sealing Out Water and Grit

The RMRcc has a rubber gasket around its battery compartment that pushes down on the sealing plate. With a shorter plate and an overhang, that can leave a small gap up front. This plate closes that gap so it behaves like a plate as long as the optic itself, keeping moisture and debris from sneaking in around the electronics.

A torque wrench is a must for proper installation, and the included VC-3 helps keep everything locked in place. This plate fits only the Glock 43X and 48 paired with the Trijicon RMRcc, so make sure that is the combo you are running.

Key Specifications

  • Manufacturer: Forward Controls Design
  • Manufacturer Part Number: OPF-G43X/48, RMRcc
  • UPC: 687408648685
  • Model: 48
  • Fits: Glock 43X and 48 MOS
  • Optic Compatibility: Trijicon RMRcc
  • Material: 1018 Steel
  • Finish: Black Nitride
  • Color: Black
  • Weight: 0.75 oz
  • Plate-to-Slide Torque: 12 to 15 in-lbs
  • Sight-to-Plate Torque: 18 in-lbs
  • Country of Origin: Made in USA

What’s Included

  • OPF-G43X/48 RMRcc adapter plate
  • T10 wrench
  • T20 wrench
  • 2 plate-to-slide screws (M4-0.7mm x 8mm)
  • 2 sight-to-plate screws (T10 5-40 x 1/4)
  • Packet of VC-3

Frequently Asked Questions

Will this RMRcc adapter plate fit my Glock 43X or 48?

It fits the Glock 43X and 48 MOS models specifically, paired only with the Trijicon RMRcc optic. It will not work with other Glock models or other red dot sights. Make sure you are running an MOS slide with the RMRcc footprint before ordering.

Does the plate keep the RMRcc sitting low on the slide?

Yes. The design keeps the bottom of the RMRcc, with the Trijicon sealing plate installed, nearly flush with the top of your slide for the lowest possible sight height. The optic is also centered on the plate to reduce unsupported overhang up front.

What screws and tools come with the plate?

It ships with a T10 wrench, a T20 wrench, two plate-to-slide screws, two sight-to-plate screws, and a packet of VC-3 threadlocker. The RMRcc mounting screws that come with your Trijicon optic can also be used. Keep in mind a torque wrench is required to properly seat everything to spec.

Does this plate help seal out water and debris?

It does. The RMRcc has a rubber gasket around its battery compartment, and with a shorter plate an overhang can leave a small gap. This design closes that gap so it acts like a plate as long as the optic itself, helping keep moisture and grit away from the electronics.

Additional information

UPC

687408648685

Manufacturer

Manufacturer Part Number

OPF-G43X/48, RMRCC

Color

Black

Model

Reviews

There are no reviews yet.

Be the first to review “Forward Controls OPF-G43X/48 RMRcc Adapter Plate for Glock 43X/48”