Description
These Accura Precision-Bond handgun bullets are a .400 diameter, 180 grain flat point projectile built for the .40 caliber reloader who wants jacketed-like performance without emptying the wallet. They start with a swaged lead core and wrap it in a precision-bonded copper plating, which gives you a cleaner burn than bare cast lead and smoother feeding through semi-autos. The flat point profile is a favorite for target work, steel, and general range practice, and it feeds reliably in most .40 S&W and 10mm platforms.
What Sets the Accura Precision-Bond 180gr FP Apart
Consistency is the real story here. Reloaders who weigh and measure these bullets regularly find them running right on spec, which translates to tighter standard deviation and extreme spread numbers when you work up a load. That uniformity is why plenty of competition and high-volume shooters lean on Accura's plated lineup. The bonded copper fully encases the lead core, so you get reduced lead exposure and less barrel fouling, a nice perk if you shoot indoors or run a lot of rounds in a session.
Loading the Accura 40 Cal .400" 180 FP
Accura lists a maximum velocity of 1,300 fps and a recommended cartridge overall length of 1.110 inches for this 180 grain flat point. Because these are copper-plated rather than fully jacketed, the common approach is to use published jacketed load data and start somewhere in the middle of the range, then work up while watching your chronograph. Like most plated bullets, they do their best work at moderate pistol velocities, so there's no need to run them to the ragged edge. Keep your crimp light enough that you don't cut into the plating and these will reward you with repeatable results.
This is a .400 diameter projectile only, not loaded ammunition, so you'll need your own brass, powder, and primers to assemble a finished cartridge. For anyone feeding a .40 S&W or 10mm and burning through practice rounds, Accura's Precision-Bond 180 FP is a dependable, accurate component that punches above its weight.
Key Specifications
- Manufacturer: Accura Bullets
- Caliber: 40 Cal
- Bullet Diameter: .400"
- Bullet Weight: 180 Grain
- Bullet Profile: Flat Point (FP)
- Construction: Copper-Plated, Swaged Lead Core (Precision-Bond)
- Maximum Velocity: 1,300 fps
- Recommended C.O.L.: 1.110"
- Load Data: Use jacketed data, start mid-range
- Manufacturer Part Number: 40 180 FP 400
- UPC: 850059007662
- Country of Origin: Made in USA
What’s Included
- Accura Precision-Bond 40 Cal .400" 180 grain flat point copper-plated bullets (projectiles only, not loaded ammunition)
Frequently Asked Questions
What load data should I use for the Accura Precision-Bond 180gr FP?
Accura recommends using published jacketed load data from your reloading manual for these plated bullets. The smart move is to start in the middle of the listed range and work up while watching your chronograph, since velocity varies with brass, primer, and firearm. Their listed maximum velocity is 1,300 fps with a recommended cartridge overall length of 1.110 inches.
Will these .400 diameter bullets work in both .40 S&W and 10mm?
Yes. The .400 diameter 180 grain flat point is a standard projectile for both the .40 S&W and 10mm Auto, since the two share the same bullet diameter. Just match your powder charge and overall length to whichever cartridge you're loading.
Are these loaded cartridges or just the bullets?
These are projectiles only, not loaded ammunition. You'll need to supply your own brass, powder, and primers to assemble finished rounds. They're intended for handloaders who reload their own .40 caliber ammunition.
How are copper-plated bullets different from jacketed?
Plated bullets like these have a swaged lead core fully encased in a bonded copper plating, which sits between bare cast lead and traditional jacketed bullets. They run cleaner and reduce barrel fouling compared to cast lead, and they cost less than jacketed. Because the plating is thinner than a full jacket, they perform best at moderate pistol velocities rather than being pushed to maximum jacketed speeds.





Reviews
There are no reviews yet.