0
0

Accu-Tac PC-4 Bipod Black – Picatinny Pan & Cant QD Bipod

UPC: 858520006343

$491.15

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Accu-Tac PC-4 is one of those bipods you set up once and forget about, because it just does its job. It starts life as a solid billet of 6061-T6 aircraft-grade aluminum that gets CNC machined down to its final shape, then finished in a flat black Type III hard anodized coating with high-strength steel hardware holding everything together. That kind of build is why folks who own one keep saying the same thing: rock solid, zero flex, and it doesn't wobble even with the legs fully extended.

Dialing In the PC-4 for Any Position

Each leg drops into four different angle positions across a 180-degree arc and locks in at five different height notches, and the two legs move completely independent of each other. Just pull a spring-loaded leg down and swing it where you want it. That range gives you a minimum height of 6.25 inches with legs at 45 degrees and up to 9.125 inches with legs straight down at 90, so you can get low for prone or bump it up for uneven ground and awkward terrain.

Pan and Cant That Actually Holds

The PC-4 pans left to right and cants side to side, and each one locks down separately with its own adjustable lever. That means you can level your rifle on sloped ground and track a target without the whole setup shifting on you. Once it's cinched, it stays put through the firing cycle, which is exactly what you want when you're stretching things out to distance.

Mounting the Accu-Tac PC-4

The quick-detach base clamps straight onto a 1913 Picatinny rail and tightens down by hand in seconds, no tools or extra hardware needed. Pop it on for a range session, pull it off for transport, and it goes right back to the same spot. At just under 27 ounces it carries real weight, but that heft is part of what keeps it planted. It's a fitting choice for tactical work, target and competition shooting, and airgun setups, though plenty of people run it on all kinds of rifles. Built and backed in the USA with a limited lifetime warranty.

Key Specifications

  • Model: PC-4
  • Manufacturer: Accu-Tac
  • Manufacturer Part Number: PCB-0400
  • UPC: 858520006343
  • Color: Flat Black
  • Material: 6061-T6 aircraft-grade aluminum with high-strength steel hardware
  • Finish: Type III MIL-SPEC hard anodized
  • Mount: Quick-detach 1913 Picatinny
  • Leg Positions: 4 angle positions across a 180-degree arc (45 and 90 degrees)
  • Height Notches: 5
  • Min Height (legs at 45 degrees): 6.25 in / 158.75 mm
  • Max Height (legs at 90 degrees): 9.125 in / 231.775 mm
  • Min Stance (legs at 45 degrees): 9.0 in / 228.6 mm
  • Max Stance (legs at 90 degrees): 11.0 in / 279.4 mm
  • Closed Width x Length: 4.25 in x 7.5 in
  • Weight: 26.96 oz
  • Adjustment: Independent pan and cant with lockable levers
  • Country of Manufacture: USA
  • Warranty: Limited lifetime

What’s Included

  • Accu-Tac PC-4 bipod with quick-detach 1913 Picatinny mount

Frequently Asked Questions

Does the Accu-Tac PC-4 pan and cant, or just one or the other?

It does both. The PC-4 pans left to right and cants side to side, and each motion has its own adjustable lever so you can lock them down separately. That lets you level the rifle on uneven ground while still being able to track a target.

What does the PC-4 mount to?

The PC-4 uses a quick-detach base built for a standard 1913 Picatinny rail. It clamps on and tightens by hand in seconds without any tools, and it repeats back to the same position when you reattach it.

How low and how tall can the Accu-Tac PC-4 go?

With the legs angled at 45 degrees the minimum height is 6.25 inches, and with the legs straight down at 90 degrees you can reach up to 9.125 inches. Between the four leg angles and five height notches you get a lot of flexibility for prone, bench, and uneven terrain.

Is the PC-4 heavy duty enough for hard-recoiling rifles?

Yes. It's machined from a full billet of 6061-T6 aluminum with steel hardware, and owners consistently note it stays rigid with no flex even when the legs are extended. That solid build makes it a strong pick for larger calibers as well as precision and airgun work.

Additional information

UPC

858520006343

Manufacturer

Manufacturer Part Number

PCB-0400

Color

Black

Model

Product Type

Bipod

Reviews

There are no reviews yet.

Be the first to review “Accu-Tac PC-4 Bipod Black – Picatinny Pan & Cant QD Bipod”