0
0

Hornady 9mm Luger Taper Crimp Seater Die 044177 Custom Grade

UPC: 090255441772

$31.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Loading 9mm Luger gets a whole lot simpler with Hornady's 044177 Taper Crimp Seater Die. This is the seating die from Hornady's Custom Grade New Dimension line, built to handle both jobs at once: it seats the bullet to your chosen depth and applies a taper crimp to the case mouth in the same stroke. That means one less die in your sequence and one less adjustment to chase. It's cut for 9mm Luger (9×19, 9mm Parabellum) and also handles 9×21, so if you're running either of those you're covered.

What the 044177 Taper Crimp Seater Die Does on the Press

The taper crimp removes the flare from the case mouth and rolls it back snug against the bullet while keeping a sharp edge for proper headspacing. That sharp edge matters, because 9mm headspaces on the case mouth, and a clean taper crimp is what keeps your rounds feeding smoothly through semi-auto handguns. You dial in the exact amount of crimp with a dedicated adjustment screw, so you can fine-tune the crimp without touching your seating depth or loosening the lock ring.

The Floating Sleeve That Sets This 9mm Seating Die Apart

Inside the die is a floating alignment sleeve that squares up the bullet and case before seating ever begins. It keeps bullets from going in crooked and prevents deformation at the base, which is exactly what helps cut down on skewed seats that won't chamber. Hornady includes this sleeve standard, where some other makers charge extra for the same feature. The seater stem also floats, and the lock ring uses a rubber O-ring washer to hold your settings tight once you've got everything dialed.

Built to Last

Hornady machines these to a fine internal finish and backs them with the No-Risk Lifetime Warranty, so a die that sees normal, regular use should outlast most of your presses. The die uses standard 7/8"-14 threads, so it drops right into any common single-stage or progressive press. A quick spray of One Shot case lube on the metal parts before first use never hurts.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 044177
  • UPC: 090255441772
  • Cartridge: 9mm Luger (9×19 / 9mm Parabellum), 9×21
  • Bullet Diameter: .355
  • Die Type: Taper Crimp Seater Die
  • Series: Custom Grade New Dimension
  • Thread Size: 7/8"-14
  • Press Compatibility: Any standard single-stage or progressive press
  • Floating Alignment Sleeve: Yes, included standard
  • Warranty: Hornady No-Risk Lifetime Warranty
  • Country of Origin: United States

What’s Included

  • Hornady 9mm Luger Taper Crimp Seater Die (044177)
  • Die lock ring with rubber O-ring washer
  • Floating bullet alignment sleeve
  • Seater adjustment stem

Frequently Asked Questions

Does this die both seat the bullet and crimp the case?

Yes. The 044177 is a combination seater and taper crimp die, so it seats your bullet to depth and taper crimps the case mouth in the same press stroke. That means you don't need a separate taper crimp die for your 9mm loads. A dedicated crimp adjustment screw lets you tune the crimp without changing seating depth.

Will this 9mm Luger seating die work with my existing die set?

It uses standard 7/8"-14 threads, so it threads into any common single-stage or progressive press and pairs with the sizing and expanding dies you already run. It's the seating/crimping die, not a full set, so you'll still need your sizing die and powder/expander die. Many reloaders add this one specifically for its floating alignment sleeve.

What does the floating alignment sleeve actually do?

The sleeve squares up the bullet and case mouth before the bullet gets pushed in, which keeps bullets from seating crooked. That helps prevent base deformation and cuts down on the occasional skewed round that won't chamber cleanly. It comes standard on this die, where some brands charge extra for the feature.

Can this die load 9×21 in addition to 9mm Luger?

Yes. The 044177 is set up for 9mm Luger (also called 9×19 or 9mm Parabellum) as well as 9×21. Both share the same .355 bullet diameter, so this one die covers both cartridges.

Additional information

UPC

090255441772

Manufacturer

Manufacturer Part Number

044177

Reviews

There are no reviews yet.

Be the first to review “Hornady 9mm Luger Taper Crimp Seater Die 044177 Custom Grade”