0
0

Hornady 7mm WSM Custom Grade Full Length Sizing Die (046451)

UPC: 090255464511

$49.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is Hornady's Custom Grade full length sizing die built specifically for 7mm Winchester Short Magnum. It takes your fired brass and sizes the case back down to minimum spec, which means reliable chambering and cases you can run through more than one rifle. Precise machining and one of the smoothest internal finishes in the business keep things sliding without the brass sticking or dragging. Hornady builds these to last, and they stand behind them with a guarantee that they won't wear out or break under normal use.

What the Zip Spindle Brings to the 7mm WSM Die

The decapping assembly rides on Hornady's Zip Spindle, which uses light threads cut on both the spindle and the collet. That lets you make fine incremental adjustments by turning it, or just zip the whole thing up or down when you need a bigger move. Once you set it, it locks positively so there's no slippage mid-session. The headed steel decap pin is tough enough to punch out crimped primer pockets if you run into any.

Elliptical Expander and Sure-Loc Ring

Instead of the old ball expander, this 7mm WSM die uses Hornady's elliptical expander. It glides through the case neck with far less friction and reduces neck stretch, which translates to more consistent neck tension and longer brass life. The die also ships with a Sure-Loc lock ring that clamps around the full body of the die with wrench flats, so you get even pressure holding your setting and no thread damage from pliers.

Fit and Setup

The die uses standard 7/8-14 threads, so it drops into any common single-stage or progressive press, whether you're running a Hornady Lock-N-Load, RCBS, Lyman, or similar. Give your brass a light coat of case lube before sizing, back the ring off to touch the shell holder plus a touch more, and you're set for consistent, repeatable results on your 7mm WSM loads.

Key Specifications

  • Manufacturer: Hornady
  • Cartridge: 7mm Winchester Short Magnum (7mm WSM)
  • Die Style: Full Length Sizing Die
  • Series: Custom Grade
  • Gun Type: Rifle
  • Thread: 7/8-14
  • Spindle: Zip Spindle with headed steel decap pin
  • Expander: Elliptical Expander
  • Lock Ring: Sure-Loc with wrench flats
  • Quantity: 1 die
  • Manufacturer Part Number: 046451
  • UPC: 090255464511

What’s Included

  • Full length sizing die
  • Sure-Loc lock ring
  • Zip Spindle with elliptical expander and headed decap pin
  • Plastic storage box

Frequently Asked Questions

Is this a complete die set or just the sizing die?

This is a single full length sizing die, not a two-die set. It handles resizing and depriming of your 7mm WSM brass. If you want to seat bullets, you'll need to add a seating die separately.

Will the 7mm WSM die fit my press?

Yes, it uses the standard 7/8-14 thread that fits all common presses, including Hornady Lock-N-Load, RCBS, Lyman, and others. It works in both single-stage and progressive setups. Just thread it in like any standard die.

What does the elliptical expander do compared to a ball expander?

The elliptical expander glides through the case neck with a lot less friction than a traditional ball expander. That reduces neck stretch and work hardening, which gives you more consistent neck tension and longer case life.

Do I need to lubricate my brass with this die?

Yes. This is a full length sizing die for bottleneck rifle brass, so you'll want to apply case lube before running cases through it. Lubing prevents stuck cases and keeps the operation smooth.

Additional information

UPC

090255464511

Manufacturer

Manufacturer Part Number

046451

Reviews

There are no reviews yet.

Be the first to review “Hornady 7mm WSM Custom Grade Full Length Sizing Die (046451)”