Description
If you're loading for a bolt action chambered in 7mm Express, .280 Remington, or .280 Ackley Improved and you want the best accuracy your rifle can give, this is the die that gets you there. Instead of working the whole case, Lee's collet design uses a set of steel fingers to squeeze the case neck against a hardened central mandrel. The result is a straight, concentric neck with very little runout, which translates to bullets that start out truer in the bore.
How the 7mm Express / .280 Remington Collet Die Works
The magic here is in the collet itself. As you run the case up into the die, the collet closes down and pinches the neck against the mandrel, sizing from the outside in while the mandrel sets your inside diameter for a consistent bullet grip. Because it only touches the neck, the body and shoulder stay exactly as your chamber formed them. That fire formed fit is a big part of why neck-sized brass tends to shoot tighter groups in the rifle it was fired in.
Why Reloaders Reach for This Lee Collet Neck Sizer
No case lubrication is needed, which cuts out the messy lube-and-tumble step and the dented shoulders that come with it. The die deprimes the case as it sizes, and because you're only touching the neck and not overworking the brass, cases tend to last considerably longer before the necks fatigue. It's a favorite with precision handloaders who keep their brass sorted by rifle.
Keep in mind this is a neck-sizing die, so it's built for brass that has already been fired in your own chamber, and it's best suited to bolt guns and other repeaters rather than semi-autos. It threads into any standard 7/8"-14 press, so it'll drop right into whatever single stage or turret you're already running. If you want to add it to a full setup, Lee also offers matching seating and crimp dies in this chambering.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91013
- UPC: 734307910136
- Type: Collet Neck Sizing Die
- Cartridge: 7mm Express / .280 Remington / .280 Ackley Improved
- Ammunition Type: Rifle
- Thread: 7/8"-14
- Case Lube Required: No
- Decaps Case: Yes
- Country of Manufacture: United States
What’s Included
- Lee collet neck sizing die (die body with collet and mandrel)
- Storage box
Frequently Asked Questions
Does the 7mm Express / .280 Remington collet die need case lube?
No, it runs completely lube-free. The collet squeezes the neck against the mandrel without touching the case body, so there's no sticking and no need to lube and tumble afterward. That saves a step and keeps your brass clean.
Will this die work with .280 Ackley Improved brass?
Yes. Lee lists this die for 7mm Express, .280 Remington, and .280 Ackley Improved. As with any neck sizer, it's intended for cases that have already been fired and fire formed in your own rifle's chamber.
Is a collet neck sizer good for semi-automatic rifles?
Neck sizing is best suited to bolt actions and other manual repeaters. Because the body of the case stays sized to your chamber, the tighter fit isn't ideal for autoloaders, slide actions, or lever guns. For those, a full-length sizing die is the better call.
Does this die deprime the case while it sizes?
Yes, the die deprimes the case as it sizes the neck, so you don't need a separate decapping step. It threads into any standard 7/8"-14 press, making setup quick on a single stage or turret.




Reviews
There are no reviews yet.