Description
The Redding Type S Bushing Full Length Die for 7mm-08 Remington is built for handloaders who want more control than a standard sizing die can offer. In a single stroke it sizes the full body of the case, bumps the shoulder back where you set it, and sizes the neck using an interchangeable bushing. That means you decide exactly how much neck tension you want instead of being locked into whatever a factory button gives you.
What Sets the 7mm-08 Type S Bushing Die Apart
The magic here is the bushing system. Bushings come in .001" increments, so you can match your neck sizing to your brass and the amount of grip you want on the bullet. Because the bushing floats and self-centers on the case neck, concentricity stays tight, which is a big deal if you're chasing small groups off the bench. The adjustable decapping rod lets you position the bushing to size only part of the neck when you want to leave a section unsized for alignment.
Running the Redding Type S Full Length Bushing Die
This die arrives with both a standard size button and a decapping pin retainer, so you've got options depending on how your brass is prepped. If your cases haven't been neck turned or sorted by neck wall thickness, running the standard button is the way to go. For sorted or turned brass, you can pull the button and let the bushing do all the neck work. One handy bonus: strip out the bushing and internal parts and this die doubles as a body die when you only need to work the case body and shoulder.
Who Gets the Most Out of This Die
This one is aimed at the precision crowd loading for 7mm-08, whether that's a hunting rifle you want shooting lights out or a target gun where every thousandth matters. Keep in mind the bushings and shellholder are sold separately, so you'll want to pick up the bushing size that fits your brass and neck tension goals before your first session.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 77139
- UPC: 611760771392
- Cartridge: 7mm-08 Remington
- Die Style: Type S Bushing Full Length Sizing Die
- Bushing Increments: .001"
- Thread Size: 7/8"-14
- Bullet Diameter: 0.284"
- Shellholder: #1 (sold separately)
- Gun Type: Rifle
What’s Included
- Type S Bushing Full Length Sizing Die
- Standard size button
- Decapping pin retainer
Frequently Asked Questions
Does the Type S Bushing Full Length Die come with bushings?
No, the die is supplied without bushings so you can choose the exact size you need. Bushings are available in .001" increments to match your brass and desired neck tension. You'll want to measure a loaded round and pick your bushing accordingly before loading.
Can the 7mm-08 Type S die be used as a body die?
Yes. By removing the bushing and the internal parts, this Type S full length bushing die can be run as a body die. That's handy when you only want to size the case body and bump the shoulder without touching the neck.
Do I need a shellholder with this die?
Yes, and it's sold separately. The 7mm-08 Remington uses a #1 shellholder. If you already reload cartridges in the same case head family you may already have the right one on hand.
What's the advantage of a bushing die over a standard sizing die?
A bushing die lets you control exactly how much the neck gets sized, which sets your neck tension precisely. The floating bushing self-centers on the neck for better concentricity, and you can size the body, bump the shoulder, and size the neck all in one operation. It's a go-to for handloaders focused on consistency and accuracy.



Reviews
There are no reviews yet.