Description
The 6mm Dasher has earned its reputation on the PRS and benchrest circuits for a reason, and feeding it good ammo starts with good tooling. This Forster Ultra Die Set (part number UFB4275) gives you two of the brand's best dies in one box, built around tight tolerances and the kind of straight-line consistency that shows up on paper. You get a Bushing Full Length Sizing Die and a Bench Rest Ultra Micrometer Seater Die, plus three pre-selected bushings to tune your neck tension exactly where you want it.
What the 6mm Dasher Sizing Die Brings to the Bench
The full length sizing die lets you control neck sizing tension while it works the case body and bumps the shoulder back to proper headspace. Because the shoulder and body are sized down just enough to chamber cleanly and the bushing only touches the neck as much as needed, you get better accuracy and longer case life out of your Dasher brass. The included Accu-Ring and etched reference line make it easy to repeat your shoulder bump setting load after load. The kit ships with .264", .266", and .268" bushings, so you can match the grip to your brass thickness and the neck tension your rifle likes.
Dialing Seating Depth with the Ultra Micrometer Seater
Forster pioneered the sliding sleeve seating design, and the Ultra Micrometer Seater is a refined take on it. A spring-loaded sliding chamber fully captures the case and holds the bullet, case, and seating stem in a common axis before the bullet is press-fit seated, which keeps runout low and concentricity high. The micrometer head adjusts seating depth in .001" increments in either direction, with bright white markings that are easy to read and record. That makes chasing the lands or testing jump a repeatable job instead of a guessing game.
Built for the Precision Crowd
This is a non-crimping seater, so it treats your bullets gently while still delivering consistent overall length. Everything here is made in the USA to Forster's longstanding manufacturing standards. For anyone running a 6mm Dasher in competition or load development, this set covers the two most critical steps in building accurate ammo.
Key Specifications
- Manufacturer: Forster Products
- Cartridge: 6mm Dasher
- Manufacturer Part Number: UFB4275
- UPC: 757253990472
- Set Type: 2-Die Ultra Set with Bushings
- Sizing Die: Bushing Full Length Sizing Die with Accu-Ring
- Seater Die: Bench Rest Ultra Micrometer Seater
- Bushings Included: 0.264", 0.266", 0.268"
- Micrometer Adjustment: .001" increments, both directions
- Seater Style: Non-crimping
- Country of Origin: USA
- Shipping Weight: 1.515 lbs
What’s Included
- One Forster Bushing Full Length Sizing Die with Accu-Ring
- One Forster Bench Rest Ultra Micrometer Seater Die
- Three neck bushings (0.264", 0.266", 0.268")
- Split type lock ring
- Storage case
- Instructions
Frequently Asked Questions
What bushings come with the 6mm Dasher Ultra Die Set?
The set ships with three bushings sized .264", .266", and .268". Forster pre-selects these for the 6mm Dasher so you can match your neck tension to your brass thickness. If you neck turn or run thinner brass, you may want to add an additional bushing size, but these three cover most common setups.
Does this 6mm Dasher die set include a seating die?
Yes. Along with the bushing full length sizing die, you get Forster's Bench Rest Ultra Micrometer Seater Die. It uses a sliding sleeve to hold the case and bullet in alignment and a micrometer head to adjust seating depth in .001" increments, which makes repeatable load development a lot easier.
What is the difference between the bushing sizing die and a standard full length die?
A standard full length die sizes the neck a fixed amount, while this bushing die lets you choose exactly how much neck tension you apply by swapping bushings. It still sizes the body and bumps the shoulder for proper headspace, but the neck is only worked as much as the bushing requires. That extra control means better accuracy and longer brass life.
Will the Ultra Micrometer Seater crimp my bullets?
No, this is a non-crimping style seater. It press-fit seats the bullet while keeping everything in line for low runout, so your bullets are handled gently and your overall length stays consistent from round to round.





Reviews
There are no reviews yet.