0
0

Redding 6mm BR Remington Body Die (75317) Reloading Die

UPC: 611760753176

$39.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding 6mm BR Remington Body Die handles one specific job and does it well: it full length sizes the case body and bumps the shoulder back for proper headspace, all while leaving the neck completely alone. That matters to the 6 BR crowd, where neck tension and concentricity are everything. After a bunch of firings and neck-only sizing, brass tends to grow a little in the body and gets stiff to chamber. This is the die that brings it back into spec without undoing the careful neck work you've already done.

Where the 6mm BR Body Die Fits in Your Process

Most folks run this alongside a dedicated neck sizing setup, like a Lee Collet die, a Redding Type S bushing neck die, or a competition neck die. You neck size for a few firings, then run the body die when cases start getting tight on close. The die uses the standard #1 shellholder (Redding part 11001), threads into any standard 7/8"-14 press, and like all body dies it's sold on its own since the shellholder isn't included.

Why Reloaders Keep the 6mm BR Remington Body Die on the Bench

There are no moving internal parts to fuss with, so there's nothing to break or wear out. You control exactly how much the shoulder gets set back by adjusting the die's position relative to the shellholder, and pairing it with a datum gauge takes the guesswork out of dialing in your headspace. Reloaders working 6 BR and even necking 6.5×47 Lapua brass down to 6×47 report clean, consistent results, and the die earns a reputation for sizing a touch snugger than a standard full length sizer.

Machined in the USA to Redding's usual standard, this is a straightforward, long-lasting tool for anyone chasing tight groups and long brass life out of the 6mm BR Remington and 6mm Norma BR.

Key Specifications

  • Manufacturer: Redding
  • Caliber: 6mm BR Remington (6mm Norma BR)
  • Die Type: Body Die
  • Manufacturer Part Number: 75317
  • UPC: 611760753176
  • Bullet Diameter: 0.243"
  • Shellholder: #1 (Redding part 11001), sold separately
  • Thread: Standard 7/8"-14
  • Material: Steel
  • Internal Parts: None
  • Country of Origin: USA

What’s Included

  • One Redding 6mm BR Remington body die with lock ring
  • Die box
  • Instructions

Frequently Asked Questions

Does the 6mm BR body die size the neck?

No. The body die full length sizes the case body and bumps the shoulder back for proper chambering, but it leaves the neck untouched. That's the whole point of a body die, so you'll want to size the neck separately with a neck die to set your neck tension.

What shellholder do I need for this Redding 6mm BR die?

It uses the standard #1 shellholder, which is Redding part number 11001. Like all Redding body dies, the shellholder is sold separately and is not included in the box.

When should I use the body die instead of my full length sizer?

It's made for brass that has been neck sized for several firings and is starting to get tight to chamber. Running it through the body die brings the case body and shoulder back into spec so it closes easily again, without disturbing the neck work you've done. Many precision reloaders use it as the companion to a bushing-style neck die.

Does this die fit a standard reloading press?

Yes. It threads into any press with the standard 7/8"-14 die thread, so it drops right into common single-stage and turret presses. You adjust shoulder bump by changing the die's position relative to the shellholder.

Additional information

UPC

611760753176

Manufacturer

Manufacturer Part Number

75317

Reviews

There are no reviews yet.

Be the first to review “Redding 6mm BR Remington Body Die (75317) Reloading Die”