Description
If you load for 6mm BR and care about shaving down your runout and tightening your groups, this is the seater die that gets you there. The Forster Ultra Micrometer Seater Die carries over everything people love about Forster's original Bench Rest seater and adds a micrometer head on top, so you can set and repeat seating depth without a bunch of trial and error at the bench.
The heart of this die is the floating chamber sleeve. It fully captures the case before the bullet ever touches the seating stem, holding the case and bullet in perfect alignment while the bullet press-fits into the neck. That sliding sleeve design is what Forster pioneered years ago, and it's a big reason their seaters earn such a strong reputation for producing straight, concentric ammo.
What the Micrometer Head Does for Your 6mm BR Loads
The micrometer top lets you adjust seating depth in clean .001" increments, and you can split that down to about .0005" when you're really chasing the lands. Gradations are marked at .001" with bright white hash marks that are easy to read in less than ideal light. Seat a bullet close, measure it, then dial the stem to the exact length you want and the next round comes out spot on. For load development where you're testing different jump distances, that repeatability is worth its weight.
Fitting the Forster Ultra Seater Die to Your Press
This is a standard 7/8-14 threaded die that works in common single-stage presses. Running it in a Forster Co-Ax press means you skip the shellholder entirely, since those presses don't use one. In any other brand of press, just grab the shellholder the press maker recommends for 6mm BR and you're set.
One thing worth noting for folks who also crimp: this is a non-crimping seater, which is exactly what you want for precision bolt-gun loads where concentricity matters more than a locked-in crimp.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: U00037
- UPC: 757253006418
- Cartridge: 6mm BR (Bench Rest)
- Die Style: Bullet Seating Die
- Die Type: Ultra Micrometer Seater
- Adjustment Increments: .001" with .0005" fine-tuning
- Graduation Marks: Marked at .001" in bright white
- Crimping: Non-crimping
- Thread Size: 7/8-14
- Alignment Feature: Floating chamber sleeve
- Country of Manufacture: United States
What’s Included
- One Forster Ultra Micrometer Seater Die for 6mm BR
Frequently Asked Questions
How fine can you adjust seating depth with the Forster Ultra Micrometer Seater Die?
The micrometer head adjusts in .001" increments and can be fine-tuned down to roughly .0005". The white gradation marks are set at .001" and are easy to read, so you can dial in and repeat an exact seating depth during load development.
Does this 6mm BR seater die crimp the case?
No, this is a non-crimping seater die. It's built to hold the bullet and case in alignment for straight, concentric rounds, which is what most precision and bolt-gun loaders want. If you need a crimp, you'd add a separate crimping die.
Do I need a shellholder to use the Forster Ultra Seater Die?
It depends on your press. If you run a Forster Co-Ax press, no shellholder is required since those presses don't use one. In any other brand of press, use the shellholder recommended by that press manufacturer for 6mm BR.
What makes the Forster Ultra Micrometer Seater Die produce straight ammo?
The floating chamber sleeve fully captures the case before the bullet is seated, holding both in alignment during the press-fit. Forster pioneered this sliding sleeve approach, and it's the main reason these dies are known for low runout and consistent concentricity.




Reviews
There are no reviews yet.