Description
If you're loading 6 GT and chasing tight groups, the seating step is where a lot of accuracy is won or lost. The Forster Bench Rest Seater Die tackles that by surrounding the whole operation inside a sliding die chamber machined specifically for the 6 GT case. That chamber has a bullet channel just slightly larger than bullet diameter, so the case and bullet are held in near-perfect alignment before the bullet ever starts to seat. The result is straight-line, co-axial seating with impressively low runout.
What Makes the 6 GT Bench Rest Seater Die Different
Forster created the first die of this kind, and the design still holds up. The close-fitting chamber is cut with a one-piece reamer to capture the cartridge before seating begins, which keeps the case, bullet, and seating stem all on the same axis. The bullet seating stem is hand polished and has been refined over the years to fit modern bullet shapes like hybrids, ballistic tips, and VLD profiles. Knurled knobs make dialing in your seating depth quick and repeatable.
Fitting the 6 GT Seater Die to Your Press
This die uses a standard 7/8"-14 thread, so it threads into most common reloading presses without any fuss. It ships with Forster's Cross Bolt Die Lock Ring, which clamps around the entire die instead of digging a set screw into the threads. That means more precise lock ring to die thread mating, no canting, and threads that stay undamaged over the long haul. Worth noting: this is a non-crimping seater, so if you want to crimp, you'd add a separate roll or taper crimp die.
Forster has been building precision reloading tools in the U.S.A. for decades, and this die carries that reputation. For anyone running a 6 GT in a bolt gun or gas gun and wanting an edge in their handloads, it's a smart, no-nonsense addition to the bench.
Key Specifications
- Manufacturer: Forster Products
- Cartridge: 6 GT
- Die Style: Bench Rest Seater Die (bullet seating)
- Crimp: Non-crimping
- Thread: 7/8"-14
- Lock Ring: Cross Bolt Die Lock Ring
- Seating Stem: Hand-polished, adjustable
- Country of Origin: Made in U.S.A.
- Manufacturer Part Number: 5948
- UPC: 757253990847
What’s Included
- One Forster Bench Rest Seater Die
- One polished seating stem
- Cross Bolt Die Lock Ring (die body split lock ring)
- Complete instructions
- Die box
Frequently Asked Questions
Does the 6 GT Bench Rest Seater Die crimp the bullet?
No, this is a non-crimping seater die. It's built purely for straight-line bullet seating with low runout. If you want to crimp your 6 GT loads, you'd pick up a separate roll or taper crimp die.
Will this die work in my press?
Yes. It uses a standard 7/8"-14 thread, so it fits most common reloading presses on the market. It also works great in a Forster Co-Ax Press, where you won't even need a shellholder.
Do I need a shellholder with the Forster 6 GT Seater Die?
If you're running a standard press, a shellholder is sold separately and is not included with the die. If you're using a Forster Co-Ax Press, you don't need one at all since the press uses jaws instead of shellholders.
What makes the Bench Rest Seater Die more accurate than a standard seater?
It uses a sliding die chamber machined specifically for the 6 GT that captures the case, bullet, and seating stem on a common axis before seating begins. That close fit, just slightly larger than bullet diameter, promotes straight-line seating and keeps runout low. The hand-polished seating stem adds consistency from round to round.





Reviews
There are no reviews yet.