0
0

Forster 6mm Dasher Bushing Full Length Sizing Die FBD4275

UPC: 757253990632

$99.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster Bushing Full Length Sizing Die is where a lot of 6mm Dasher handloaders land when they want more say over how their brass behaves. Instead of locking you into a fixed amount of neck sizing like a standard die, this one uses an interchangeable bushing so you set the exact neck tension you want. In a single pass it sizes the case body, bumps the shoulder back to set your headspace, and sizes the neck with the bushing you choose, then deprimes on the way out.

That level of control is the whole point of the Dasher. It's a finicky, accuracy-obsessed cartridge, and overworking the neck round after round is one of the quickest ways to shorten brass life. By sizing the neck only as much as the bushing dictates and bringing the body and shoulder down just enough to fit a minimum SAAMI chamber, you keep that fire-formed fit to your own rifle while cutting down on brass flow and work hardening. Concentricity stays tight, which is exactly what you're chasing when you're loading for a match or chasing small groups off the bench.

What Sets the Dasher Bushing Full Length Die Apart

Forster machines these dies with one-piece reamers to keep every internal diameter concentric, then heat treats and hand polishes them for a smooth, long-lasting finish. The die ships with an etched reference line and the Forster Accu-Ring lock ring, so you can make repeatable shoulder bump adjustments in roughly .001 inch steps and set the die up identically every session. It threads into any standard 7/8-14 press, including Forster's own Co-Ax.

Picking Bushings for Your 6 Dasher Die

One thing to know going in: this die does not include bushings. You'll want to measure the neck of a loaded round and pick a bushing around .002 inch smaller than that measurement, adjusting for how much neck tension your setup likes. Forster neck bushings come in .001 inch increments with a slick interior finish, so you can fine-tune tension to your brass and your bullet seating without guessing.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: FBD4275
  • UPC: 757253990632
  • Cartridge: 6mm Dasher
  • Die Style: Bushing Full Length Sizing Die
  • Function: Sizes neck, body and shoulder, deprimes
  • Thread: 7/8-14 (fits standard presses and Co-Ax)
  • Lock Ring: Accu-Ring with etched reference line
  • Adjustment: Shoulder bump in approximately .001 inch increments
  • Bushings: Not included, sold separately
  • Construction: Machined with one-piece reamers, heat treated, hand polished
  • Made In: U.S.A.

What’s Included

  • Bushing Full Length Sizing Die body
  • Accu-Ring lock ring with etched reference line
  • Decapping/expander assembly
  • Instructions

Frequently Asked Questions

Does the 6mm Dasher Bushing Full Length Sizing Die come with bushings?

No, this die is sold without bushings. You purchase Forster neck bushings separately in .001 inch increments so you can match the neck tension to your specific brass and bullet. If you'd rather have them in the box, Forster also offers a kit version that includes three bushings.

How do I choose the right bushing for my Dasher brass?

Measure the outside neck diameter of a loaded round, then pick a bushing roughly .002 inch smaller than that measurement. Neck wall thickness varies by brass brand, so measuring your own loaded rounds is the reliable way to go. From there you can fine-tune up or down in .001 inch steps to get the neck tension your rifle shoots best.

What does this die actually do in one pass?

It sizes the case body, bumps the shoulder back to set headspace, sizes the neck using your chosen bushing, and deprimes the case. Because the neck is only worked as much as the bushing dictates, you avoid overworking the brass and tend to get more reloads out of each case while keeping everything concentric.

Will the Forster Dasher die fit my press?

Yes, it uses standard 7/8-14 threads, so it works in common single stage and turret presses as well as Forster's Co-Ax. The Accu-Ring lock ring with its etched reference line makes it easy to set your shoulder bump and return to the same setting every session.

Additional information

UPC

757253990632

Manufacturer

Manufacturer Part Number

FBD4275

Shipping Weight

0.515

Reviews

There are no reviews yet.

Be the first to review “Forster 6mm Dasher Bushing Full Length Sizing Die FBD4275”