Description
The Forster Bushing Bump Neck Die Kit is built for the 6.5×55 Swede handloader who wants tight control over neck tension without beating up their brass. Instead of full-length sizing the whole case or neck-sizing only, this die splits the difference. It resizes the outside of the case neck and bumps the shoulder back just enough to set proper headspace, all in a single stroke, while leaving the fire-formed body of the case alone. That keeps your brass aligned to your rifle's chamber and stretches case life a long way.
What Makes the 6.5×55 Swede Bushing Bump Die Different
The magic here is the interchangeable bushing system. Your bushing choice sets the outside neck diameter, which in turn controls how much grip you put on the bullet. Forster offers bushings in .001 inch increments, so you can fine-tune bullet tension to match your load and your brass. This kit comes with three bushings pre-selected by Forster's staff, sized at .293, .291, and .289, which cover the range most 6.5×55 reloaders reach for. A good starting point is a bushing roughly .002 inch under your loaded neck diameter, then adjust from there.
Fit, Finish, and Setup Notes
Forster hand-polishes the interior of these dies and machines them with one-piece reamers for excellent concentricity, which is a big part of why they feed smoothly and produce consistent ammo. The die includes a decapping assembly for depriming and runs on a floating design that helps keep everything centered. One thing worth knowing up front: these dies accept Forster bushings only, not Redding or Wilson. If you neck-turn your brass for uniform wall thickness, you can run the die purely off the bushing. If your brass isn't turned, pick a bushing on the larger side so the neck still sizes down enough for proper tension.
This is a die aimed at precision loaders building ammo for a specific rifle, whether you're feeding a vintage Swedish Mauser or a modern 6.5×55 bolt gun. Pair it with a quality seating die and you've got the makings of seriously consistent rounds.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: BBK2420
- UPC: 757253997884
- Cartridge: 6.5x55mm Swedish Mauser
- Die Type: Bushing Bump Neck Sizing Die
- Bushings Included: 3 (.293, .291, .289)
- Bushing Increments Available: .001 inch
- Bushing Compatibility: Forster bushings only
- Decapping Assembly: Included
- Interior Finish: Hand-polished
- Country of Origin: USA
What’s Included
- One Forster Bushing Bump Neck Sizing Die
- Three neck sizing bushings pre-selected by Forster (.293, .291, .289)
- Decapping assembly
- Complete instructions
Frequently Asked Questions
What bushings come with the 6.5×55 Swede Bushing Bump Die Kit?
The kit ships with three Forster bushings sized at .293, .291, and .289, pre-selected by Forster's staff to cover the range most 6.5×55 reloaders need. These let you adjust outside neck diameter and bullet tension in small steps. If you need a different size, Forster offers bushings in .001 inch increments, sold separately.
Does this die use an expander ball?
The Forster Bushing Bump Die relies on the bushing to set your neck's inside diameter, so it ships without an expander ball in the decapping assembly. Many precision loaders prefer running bushings only because it reduces brass working and helps with consistent neck tension. If you don't neck-turn your brass, just choose a bushing large enough that the neck still sizes down to proper tension.
Will Redding or Wilson bushings fit this Forster die?
No. The Forster Bushing Bump Neck Die accepts Forster bushings only and will not work with Redding or Wilson bushings. Stick with Forster bushings when you want to add sizes to your collection.
How is a bushing bump die different from a standard full-length or neck die?
A full-length die resizes the entire case and a neck die only sizes the neck, each with tradeoffs. The bushing bump die sizes the neck and bumps the shoulder back slightly for correct headspace while leaving the fire-formed body untouched. That combination gives you smooth chambering and precise neck tension without overworking your brass, which extends case life.




Reviews
There are no reviews yet.