Description
The Forster Ultra Micrometer Seater Die takes the guesswork out of seating bullets for your 6.5×47 Lapua. It carries all the straight-line seating features of Forster's original Bench Rest seater and adds a micrometer head on top, so you can dial your bullet seating depth instead of chasing it with trial and error. The micrometer adjusts in either direction and is easily fine-tuned down to .0005 inch, with bright white gradation marks at .001 inch increments that are simple to read under shop lighting.
How the Ultra Micrometer Seater Die Keeps Things Straight
What separates this die is the sliding chamber design. It holds the bullet, case, and seating stem together in one close-fitting chamber through the entire seating stroke, supporting the full outside diameter of the sized case rather than just the neck. The result is excellent concentricity and reduced runout, which is exactly what you want when you're building 6.5×47 Lapua ammo for a bolt gun. This is a non-crimping seater, so the bullet and case stay in perfect alignment while the bullet is press-fit to depth.
Dialing In Your 6.5×47 Lapua Loads
Once you seat a bullet close to your target length and measure it, you just turn the micrometer stem to the exact depth you need and the next round comes out spot on. Each full revolution of the micro head moves .025 inch, so creeping up on the lands is painless. If you run different bullets through the same rifle, record your setting for each one and dial right back to it next session. This die also uses Forster's Cross Bolt lock ring, which clamps around the die body instead of digging a screw into the threads, so your settings hold and the threads stay clean.
Built in the USA from carefully machined steel and hand polished before and after heat treating, this seater is a favorite among precision handloaders for consistent, repeatable results on the bench.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: U00057
- UPC: 757253999208
- Caliber: 6.5x47mm Lapua
- Die Type: Ultra Micrometer Bullet Seater (non-crimping)
- Adjustment Increment: .001 inch gradations, adjustable to .0005 inch
- Micro Head Travel: .025 inch per full revolution
- Lock Ring: Forster Cross Bolt Die Locking Ring
- Material: Machined and hand-polished steel
- Country of Origin: United States
- Color: Black
What’s Included
- Forster Ultra Micrometer Seater Die (6.5×47 Lapua)
- Cross Bolt Die Locking Ring
- User instructions
Frequently Asked Questions
Does the Ultra Micrometer Seater Die crimp the case?
No, this is a non-crimping seater die. It holds the bullet and case in perfect alignment while the bullet is press-fit to your chosen depth, which is what you want for precision bolt-action loads. If you need a crimp, you'd add a separate crimp die to your process.
How fine can I adjust bullet seating depth with this die?
The micrometer head is marked in .001 inch gradations and can be fine-tuned down to .0005 inch. Each full turn of the micro head moves seating depth .025 inch, so creeping up on the lands is easy. The bright white markings make it simple to read and repeat your settings.
Will this Forster die work in my press?
Yes, it uses standard 7/8-14 threads and fits most common reloading presses. If you run a Forster Co-Ax press, you won't need a shell holder, but in any other brand press you'll use the shell holder recommended by that press maker. It installs like any standard seating die.
Do I need the sizing die too, or is this enough on its own?
This is a seater die only, which handles the final step of pressing the bullet to depth. To load from fired brass you'll also need a sizing die to resize, deprime, and prep your 6.5×47 Lapua cases. Many reloaders pair this Ultra Micrometer seater with a Forster full length sizer.




Reviews
There are no reviews yet.