$79.20
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you've been fighting inconsistent seating depth or runout from your threaded press dies, the L.E. Wilson 6.5 PRC chamber type bullet seating die takes a completely different approach. Instead of threading into a press, this hand die holds the case and bullet captive inside a precision-machined chamber that mirrors your rifle's chamber. The bullet is pushed straight into the case mouth by a close-fitting seating stem, which keeps everything in line and cuts out the rocking and tilt that can creep into conventional seaters. Wilson has been building these for generations, and they've earned a loyal following among folks who care about tight concentricity.
The whole design leans on one idea: take the threads out of the equation. With the die sitting flat on a solid surface and the case fully supported, the bullet goes in aligned to the center axis of the case. Reloaders routinely report minimal runout, often measuring in the one to two thousandths range, which matters when you're stretching a 6.5 PRC out to distance. It's a favorite in benchrest, F-Class, PRS, and precision hunting circles for exactly that reason.
This is the standard chamber seater, so depth adjustments are handled with the cap screw using 3/8"-24 TPI threads rather than a micrometer top. It's designed to run with an arbor press, which gives you real feel for seating force so you can cull any round that seats noticeably hard or soft. In a pinch you can seat with a soft mallet, but an arbor press is the smoother, faster way to go. Keep in mind this is a seating die only and isn't meant for a conventional threaded press.
Machined from stainless steel and made in the USA, the body carries laser-engraved markings and is built to hold up through thousands of rounds. For precision 6.5 PRC handloaders who want cleaner, more repeatable ammo, this is one of the most proven seaters on the market.
No, this is the standard chamber type seater (BS65-PRC), not the micrometer version. Depth is set with the cap screw using 3/8"-24 TPI threads. If you want a micrometer top for quick, repeatable depth changes, that's a separate stainless model.
This is a hand die built to run on an arbor press, which lets you feel the seating force on every round. You can seat with a soft-faced mallet in a pinch, but an arbor press is faster and more consistent. It is not designed for a conventional threaded reloading press.
The chamber type design captures both the case and bullet in a precision cavity and pushes the bullet straight in, taking the threads out of the seating process. That alignment produces tighter concentricity and lower runout than most conventional 7/8"-14 dies. It's why these are a staple on benchrest and long-range benches.
Yes. This is a bullet seating die only and does not size brass. You'll want a separate sizing die to prep your cases before seating, since clean, concentric necks are a big part of getting the full accuracy benefit from this seater.
| UPC | 815145027085 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BS65-PRC |
| Shipping Weight | 1.0 |
You must be logged in to post a review.
Reviews
There are no reviews yet.