0
0

Redding 6.5 Grendel Type S Bushing Full Length Sizing Die 77478

UPC: 611760774782

$90.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding Type S Bushing Full Length Sizing Die handles a job most single dies can't do in one pass: it sizes the entire case body and sets the shoulder back while giving you precise control over neck tension. Instead of relying on a fixed neck diameter, this die uses interchangeable bushings so you can tailor exactly how tight the neck grips your bullet. For 6.5 Grendel loaders running an AR or a bolt gun, that kind of control is a big step up from standard sizing dies.

How the Type S 6.5 Grendel Die Works

The magic is in the bushing system. The floating bushing self-centers on the case neck as it sizes, which helps cut down on runout and produces straighter loaded rounds. Bushings are sold separately and come in .001 inch increments, so you can fine tune neck tension to match your specific brass and bullet combo. Most 6.5 Grendel loaders land somewhere around a .288 or .289 bushing with common brass, though the right size depends on your loaded round diameter. The usual trick is to measure the neck of a loaded cartridge and subtract about .001 to .003 inches depending on how much tension you want. Gas guns generally like a touch more tension to keep bullets from backing out during feeding.

Flexibility Built Into This Redding Bushing Die

This die ships with an adjustable decapping rod that lets you position the bushing to size only part of the neck when you want, plus a decapping pin retainer for folks who turn their necks and prefer to skip the expander button entirely. Pull the bushing and the internal parts out and the body of the die can even pull double duty as a body die for bump-only sizing.

Like the rest of the Redding lineup, it's machined from quality steel on precision lathes and uses the standard 7/8-14 threaded body, so it drops right into any common single stage or turret press. Keep in mind the shellholder and bushings are not included, so grab a #12 shellholder and the bushing size that fits your load.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 77478
  • UPC: 611760774782
  • Caliber: 6.5mm Grendel
  • Die Type: Type S Bushing Full Length Sizing Die
  • Bushing Adjustment: Interchangeable bushings in .001 inch increments
  • Thread: 7/8-14 standard
  • Material: Case hardened steel
  • Shellholder: #12 (sold separately)
  • Bushing Range: 0.283 to 0.291 (bushings sold separately)
  • Country of Origin: United States

What’s Included

  • Type S bushing full length sizing die body
  • Adjustable decapping rod with expander button
  • Decapping pin retainer
  • Plastic storage case
  • Instruction literature

Frequently Asked Questions

Does the Redding 6.5 Grendel Type S die come with bushings?

No, the die ships without bushings, which are sold separately. This is intentional so you can pick the exact bushing size that matches your brass and bullet combo. Bushings are offered in .001 inch increments, giving you precise control over neck tension.

What bushing size should I use for 6.5 Grendel?

It depends on your specific brass and bullet, but many 6.5 Grendel loaders run a .288 or .289 bushing with common brass. The reliable method is to measure the neck diameter of a loaded round and subtract .001 to .003 inches for your desired tension. If you shoot an AR, lean toward a bit more tension, around .003 inches, to keep bullets secure during feeding.

Do I need a separate shellholder for this die?

Yes, the shellholder is not included with the die. The 6.5 Grendel uses a #12 shellholder, so you'll want to have one on hand. It threads into any standard single stage or turret press using the common 7/8-14 setup.

Can this Type S die be used as a body die?

Yes. By removing the bushing and the internal parts, the Type S full length die can function as a body die for bump-only sizing. That flexibility makes it a versatile addition to a precision reloading setup.

Additional information

UPC

611760774782

Manufacturer

Manufacturer Part Number

77478

Reviews

There are no reviews yet.

Be the first to review “Redding 6.5 Grendel Type S Bushing Full Length Sizing Die 77478”