Description
Forster built the original die of its kind, and the Bench Rest Seater Die is still the standard that other straight-line seaters get measured against. For 6.5 Creedmoor handloaders chasing tight groups and repeatable numbers, this is the seater that does the quiet work of keeping everything lined up before the bullet ever touches the case neck.
The magic is in the sliding chamber. Instead of only supporting the bullet and case neck like a conventional seater, this design surrounds the full outside diameter of the sized case while the bullet and seating stem ride in the same close-fitting chamber. Everything stays coaxial through the entire stroke, which is exactly what keeps runout low. Reloaders who fight concentricity issues in 6.5 Creedmoor tend to see noticeably better numbers after switching, with many reporting repeatable readings within a thousandth once the die is dialed in.
What Sets the 6.5 Creedmoor Bench Rest Seater Apart
The bullet seating stem is hand polished, and Forster has reworked these stems over the years to play nicely with modern ballistic tips and VLD-style bullets. That matters if you're loading match projectiles, since a stem that fits the ogive properly won't mar the tip or push seating depth around. It's a non-crimp seater, so it's all about precise seating depth and alignment rather than squeezing the case mouth.
Fitting the Forster Seater to Your Setup
This die threads into most standard reloading presses, so it drops right into a single-stage or turret setup without any fuss. It ships as a standalone seater, which is handy if you already run a sizing die you like or you just want to upgrade the seating step of your 6.5 Creedmoor process. Each die is machined from quality steel to tight tolerances and hand polished before and after hardening for a smooth, consistent feel on every pull of the handle.
If you want a crimp, you'll want to add a separate roll or taper crimp die, since this one is built purely for clean, straight seating.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: 006020
- UPC: 757253992087
- Cartridge: 6.5 Creedmoor
- Die Type: Bench Rest Seater Die
- Seating Style: Straight-line, non-crimp
- Seating Stem: Hand polished, VLD and ballistic tip compatible
- Material: Precision-machined steel
- Press Compatibility: Fits most standard reloading presses
- Gun Type: Rifle
What’s Included
- One Forster 6.5 Creedmoor Bench Rest Seater Die
Frequently Asked Questions
Does the 6.5 Creedmoor Bench Rest Seater Die crimp the case?
No, this is a non-crimp seating die focused purely on precise seating depth and straight-line alignment. If you want a crimp on your 6.5 Creedmoor loads, you'll need to add a separate roll or taper crimp die. The non-crimp design is part of what makes it so good at keeping runout low.
Will this die work with VLD and ballistic tip bullets?
Yes. Forster has refined the hand-polished seating stem over the years so it fits modern ballistic tips and most very low drag bullets properly. A good stem fit keeps the stem on the ogive where it belongs, which helps protect sensitive bullet tips and keeps seating depth consistent.
Does the Bench Rest Seater Die fit standard reloading presses?
It does. The die uses standard 7/8-14 threading and adapts to most single-stage and turret presses on the market. It drops into your existing setup without any special adapters.
Is this a complete die set or just the seater?
This is the standalone Bench Rest Seater Die only, so there's no sizing die included. It's a great pick if you already have a sizing die you trust and want to upgrade the seating step of your 6.5 Creedmoor process. Forster also offers full-length sizing dies and complete Bench Rest die sets separately if you need the full package.





Reviews
There are no reviews yet.