0
0

Redding Type S Bushing Full Length Sizing Die – 6.5-284 Norma

UPC: 611760774157

$75.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 6.5-284 Norma is a precision rifle round through and through, and it rewards reloaders who take neck tension seriously. That's exactly where this Redding Type S Full Length Bushing Sizing Die earns its spot on the bench. It resizes the full length of the case for reliable chambering and feeding, but instead of forcing every neck down to a one-size-fits-all diameter, it uses an interchangeable bushing you choose to set your own neck tension. That means less overworking of your brass, longer case life, and the kind of repeatable consistency that shows up on paper downrange.

How the 6.5-284 Type S Bushing Die Works

The magic here is the bushing system. Redding offers bushings in .001 inch increments, so you can measure a loaded round, pick the exact bushing that gives you the neck tension you want, and drop it in. The bushing floats freely inside the die, which lets it self-center on the case neck for better concentricity than you'd get from a fixed-diameter sizer. It's the same bushing setup used in Redding's bushing-style neck dies, so if you already have a stash of them, they carry right over.

Fine-Tuning Your Redding Type S Full Length Die

The decapping rod is adjustable, which lets you position the bushing to size only part of the neck when you want to. The die ships with both the standard size button and a decapping pin retainer, so case-neck turners can run it without the expander ball. Pull the bushing and the internals out entirely and it doubles as a body die, bumping shoulders without touching the neck at all. That's a lot of versatility packed into one tool.

Construction is what you'd expect from Redding: high-grade heat-treated steel, a polished interior to keep brass work-hardening to a minimum, and the tight manufacturing tolerances that have kept precision shooters loyal to this brand for years. One important note before you order is that bushings and a shellholder are not included, so pick those up to match your brass and your press.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 77415
  • UPC: 611760774157
  • Cartridge: 6.5-284 Norma (6.5×284 Winchester)
  • Die Type: Type S Full Length Bushing Sizing Die
  • Die Style: Full Length Sizing
  • Firearm Type: Rifle
  • Thread Size: 7/8-14
  • Bushing Increments: .001 inch
  • Material: Heat-treated steel
  • Country of Manufacture: United States

What’s Included

  • Type S Full Length Bushing Sizing Die
  • Standard size button
  • Decapping pin retainer

Frequently Asked Questions

Does this Type S die come with bushings?

No, the die is supplied without bushings so you can select the exact size that gives you the neck tension you want. Redding offers them in .001 inch increments in both hardened steel and titanium nitride coated versions. Measure the neck diameter of a loaded round and choose a bushing a few thousandths smaller to set your tension.

Do I need a shellholder with this 6.5-284 Norma die?

Yes, a shellholder is required and is not included with the die. You'll want a shellholder sized for the 6.5-284 Norma case head, which shares the same base as the .284 Winchester family. Any quality standard shellholder matched to your press will work.

Can the Redding Type S full length die be used as a body die?

It can. By removing the bushing and all the internal parts, the die bumps the shoulder and sizes the body without touching the neck. That gives you a nice bit of extra versatility out of a single tool.

What's the advantage of a bushing die over a standard full length sizer?

A standard sizing die necks your brass down to one fixed diameter, often more than needed, then an expander pulls it back up, which overworks the neck. A bushing die lets you control exactly how much you size the neck, reducing that overworking. The result is longer case life, more consistent neck tension, and better concentricity.

Additional information

UPC

611760774157

Manufacturer

Manufacturer Part Number

77415

Reviews

There are no reviews yet.

Be the first to review “Redding Type S Bushing Full Length Sizing Die – 6.5-284 Norma”