$15.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Marble Arms has been the go-to name for iron sights on sporting rifles for well over a century, and this 53W front sight carries that same reputation. The 3/32" gold brass bead is the star of the show here. That warm gold color catches available light and stands out cleanly against dark game, timber, and shadowed targets, which makes lining up a quick shot a whole lot easier, especially for eyes that don't grab factory black blades the way they used to. The .538" height puts it on the taller end of Marble's lineup, so it's a smart pick when your rear sight has bottomed out and you're still shooting high.
This is a barrel-mounted design meant to slide into a standard 3/8" dovetail cut, the same slot found on countless Winchester, Marlin, Savage, Remington, and other classic sporters. Folks reach for a sight like this to replace a broken or missing bead, to raise their point of impact when a peep or buckhorn rear won't drop any lower, or just to swap a hard-to-see factory blade for something faster on target. It pairs naturally with Marble's own semi-buckhorn and Bullseye peep rear sights if you're building out a full setup.
Like most quality dovetail sights, this one is cut a touch oversized on purpose so you can hand-fit it for a tight, rattle-free hold rather than a sloppy drop-in. A few passes with a fine triangle or slim taper file on the base gets it seating snugly, and once it's driven in it drifts left or right for windage adjustment. Take your time, go slow with the file, and use a brass punch or wooden dowel to tap it home without marring the finish. The result is a solid, traditional-looking sight that feels like it belongs on the gun.
Steel construction and Marble's signature contour give it that authentic old-school profile while holding up to years of field use. For anyone bringing an heirloom rifle back to life or sharpening up their sight picture on a working gun, it's a reliable, no-nonsense choice.
It's designed for any barrel with a standard 3/8" dovetail cut, which covers a huge range of Winchester, Marlin, Savage, Remington, and similar sporting and lever-action rifles. Because it's cut slightly oversized for a custom fit, most installs need a little hand-fitting with a file to seat it just right. Measure your existing dovetail and sight height before ordering so the .538" height lines up with your rear sight.
The gold brass bead reflects available light and pops against dark backgrounds like timber, brush, and shadowed game, which speeds up target acquisition. Many shooters with aging eyes find the gold bead far easier to pick up than a plain black factory blade. It's a traditional look that also happens to work extremely well in real-world hunting light.
The sight is intentionally made a touch oversized so it fits tight rather than loose. Take a few light passes with a fine triangle or slim taper file on the base until it starts into the dovetail, then tap it home with a brass punch or wooden dowel to avoid marring it. Once seated, you can drift it left or right to fine-tune your windage.
At .538" this is one of the taller front sights in Marble's lineup, so raising the front bead lowers your point of impact, which is exactly what you want when your rear sight has bottomed out and the gun still shoots high. Marble Arms publishes a height chart to help you calculate the correct front sight based on how far off you're hitting and your sighting radius. Matching the right front and rear heights is the key to getting zeroed cleanly.
| UPC | 871373002911 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 205331 |
| Color | Gold |
| Style | Barrel Mounted |
You must be logged in to post a review.
Reviews
There are no reviews yet.