0
0

Hornady 45 Auto Bullet Seating Die #3 (.451) New Dimension

UPC: 090255441512

$29.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is Hornady's bullet seating die for the 45 caliber family, built around a .451" diameter stem and sized to handle 45 ACP, 45 Auto Rim, 45 Winchester Magnum, 45 Colt, and 454 Casull depending on your bullet. It's the #3 die from Hornady's New Dimension lineup, and if you've ever fought with a bullet going in crooked, this is the piece of gear that fixes it. The whole design is about getting the bullet started straight before anything gets pressed home.

How the 45 Auto Seating Die Keeps Bullets Straight

The heart of this die is a floating alignment sleeve. Before any seating pressure is applied, the sleeve holds the bullet, the case neck, and the seating stem in line with each other, so the bullet enters the case mouth square instead of tipping. Once everything's lined up, the case pushes the floating insert into the die body and the bullet seats firmly and concentrically. The result is straighter ammo and tighter runout than you tend to get from a fixed-stem seater, which matters whether you're loading match rounds or just want consistent feeding in your 1911.

Dialing In the Hornady #3 Seating Die

Seating depth adjusts with a simple screw at the top, and a compression washer gives you the tension to make fine, repeatable changes without the setting creeping on you. There's a built-in roll or taper crimp feature you can use if you want to crimp and seat in one step, or you can back it off and apply no crimp at all. For the 45 Auto crowd, most folks run this as a straight seater and handle the taper crimp separately, but it's nice having the option on tap.

Cleaning and Upkeep

Maintenance is about as easy as it gets. The quick-disassembly retainer ring pops off in seconds with no special tools, so you can wipe out lube, powder, or shavings and get right back to the bench. Pair it with a sizing die and powder-through-expander die and you've got a complete three-die setup for pistol loading, or drop it straight into your existing Hornady or standard 7/8-14 threaded press.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 044151
  • UPC: 090255441512
  • Die Type: Bullet Seating Die (New Dimension)
  • Die Number: #3
  • Bullet Diameter: .451"
  • Compatible Calibers: 45 ACP, 45 Auto Rim, 45 Win Mag, 45 Colt, 454 Casull (bullet dependent)
  • Thread: 7/8-14 standard
  • Crimp Feature: Built-in optional roll or taper crimp
  • Alignment: In-line floating seating sleeve
  • Maintenance: Quick-disassembly retainer ring, no tools needed

What’s Included

  • Hornady 45 Auto bullet seating die
  • Sure-Loc lock ring
  • Allen key for Sure-Loc ring
  • Die storage box

Frequently Asked Questions

What calibers does the Hornady 45 Auto seating die work with?

This #3 die uses a .451" diameter stem, which covers 45 ACP, 45 Auto Rim, and 45 Winchester Magnum. Depending on the bullet you're loading, it also gets used for 45 Colt and 454 Casull, though those often run .452" bullets, so check your components. For standard 45 Auto loading it's a perfect match.

Can the Hornady 45 Auto seating die crimp at the same time?

Yes, it has a built-in roll or taper crimp feature you can engage to crimp and seat in one stroke, or back off entirely for no crimp. A lot of 45 ACP reloaders prefer to seat and taper crimp in separate steps for more consistency, so you can go either way with this die.

Does this seating die fit a standard reloading press?

It uses the industry-standard 7/8-14 thread, so it drops right into Hornady presses as well as most other single-stage and progressive presses. The included Sure-Loc lock ring clamps around the whole die body to hold your setting in place without biting into the threads.

Is this a complete die set or just the seating die?

This is a single seating die only, not a full set. To load 45 Auto start to finish you'll also want a sizing/decapping die and a powder-through-expander die. Many reloaders buy this seater individually to replace or upgrade one piece of their existing setup.

Additional information

UPC

090255441512

Manufacturer

Manufacturer Part Number

044151

Reviews

There are no reviews yet.

Be the first to review “Hornady 45 Auto Bullet Seating Die #3 (.451) New Dimension”