Description
This is the Lee Precision Full Length Sizing Die for .45-70 Government, sold as a single die rather than part of a set. It handles two jobs in one pass on the press: it resizes the entire length of the case back down to factory dimensions and pushes out the spent primer with the decapping rod. That makes it the go-to choice when you are loading range pickups, mixed brass, or any cases you are not certain were fired from your own rifle.
The die is machined from steel and uses the standard 7/8"-14 thread, so it threads right into any common single stage, turret, or progressive press. One thing worth knowing up front: because the .45-70 is a straight wall rifle case running through a steel die, case lube is required before sizing. A light coat of lube keeps cases from sticking and makes the whole operation smooth. Skip that step on a steel die and you will fight it.
Why Full Length Sizing the .45-70 Matters
Full length resizing works the brass all the way down, which guarantees the finished round will chamber in any .45-70 firearm, not just the one it was fired from. For lever actions and single shots that get fed a steady diet of brass from different sources, that reliable chambering is exactly what you want. It is the safe, dependable route when positive feeding matters more than squeezing out the last bit of case life.
Building Out Your .45-70 Government Die Setup
This sizing die covers the resizing and depriming step, so it pairs naturally with a seating die and, if you want a tighter hold on your bullets, a Lee Factory Crimp Die for the .45-70. Note that standard .45-70 dies are cut for the full 2.105" case and are not set up for the shorter Hornady LEVERevolution brass, which runs its own dedicated tooling. For traditional .45-70 brass, this die is a solid, no nonsense foundation that carries Lee's reputation for getting the job done without breaking the bank.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91113
- UPC: 734307911133
- Caliber: .45-70 Government
- Die Type: Full Length Sizing Die
- Material: Steel
- Thread Size: 7/8"-14
- Function: Full length resize and deprime
- Case Lube: Required
- Country of Origin: United States
What’s Included
- Lee .45-70 Government Full Length Sizing Die
- Decapping rod with expander
- Lock ring
- Instructions
Frequently Asked Questions
Does this .45-70 sizing die require case lube?
Yes. This is a steel die for a straight wall rifle case, so cases must be lubricated before sizing. A light, even coat of case lube keeps brass from sticking and makes each stroke smooth. Wipe the lube off before charging powder and seating bullets.
What does the full length sizing die do in one pass?
It resizes the entire length of the fired case back to factory dimensions and removes the spent primer with the decapping rod at the same time. The expander on the decapping rod also opens the case mouth so a bullet can start. That lets you handle sizing and depriming in a single pull of the press handle.
Will this die work with Hornady LEVERevolution .45-70 brass?
No. Standard .45-70 Government dies are set up for the traditional 2.105" case, while LEVERevolution brass is shorter at roughly 2.040" and uses its own dedicated tooling. For regular .45-70 brass, this die is the right choice.
Does this die fit my press?
It uses the standard 7/8"-14 thread found on nearly every common reloading press, including single stage, turret, and progressive models. You will also need a shell holder sized for the .45-70, which is not included with this single die. From there it threads right in and is ready to set up.





Reviews
There are no reviews yet.