0
0

Lee Precision .416 Rigby Factory Crimp Die (1 1/4-12 Thread) MPN 91234

UPC: 734307912345

$37.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .416 Rigby is a serious dangerous-game cartridge, and when you're building handloads that stout, you want your bullet staying exactly where you seated it. That's the whole job of this Lee Precision Factory Crimp Die. It puts a firm, uniform crimp on the case mouth so heavy recoil, magazine slamming, and rough field handling won't push bullets deeper or pull them loose. For a big-bore like the .416, that kind of bullet hold matters as much as anything else on the bench.

What the .416 Rigby Factory Crimp Die Does on the Bench

This die crimps the bullet in place more firmly than most tools out there, and it does it without needing a crimp groove or cannelure on your bullet. Lee's own testing shows that even bullets with no crimp groove tend to shoot better once they're crimped, because the pressure has to build to a higher level before the bullet starts to move. That higher start pressure gives you a more uniform pressure curve and less velocity variation from shot to shot. For a heavy-recoil hunting round, that consistency is exactly what you're after.

Thread Size and Press Fit for the .416 Rigby Crimp Die

Here's the detail that trips people up, so pay attention: this is a large-series die with a 1 1/4-12 thread, not the standard 7/8-14 thread you'll find on most dies. It's built for Lee's Classic Cast Press and other large presses that accept the bigger thread. If you're running a press with a 7/8-14 station, you'll need the correct bushing or adapter to make it work. A few reloaders have found their older presses actually have a removable insert that reveals 1 1/4-12 primary threads underneath, so it's worth checking before you assume it won't fit.

Setup Is Simple

Using it is about as straightforward as reloading gets. You thread the die in, run a loaded round up, and adjust down until you get the amount of crimp you want. No guesswork, no buckled cases like you can get with a roll crimp if you're not careful. Made in the USA by one of the most trusted names in reloading, this is a smart add to any .416 Rigby loading setup.

Key Specifications

  • Manufacturer: Lee Precision
  • Cartridge: .416 Rigby
  • Die Style: Factory Crimp Die
  • Gun Type: Rifle
  • Thread Size: 1 1/4-12 (Large Series)
  • Compatible Press: Lee Classic Cast / large-series presses
  • Material: Steel
  • Country of Origin: United States
  • Manufacturer Part Number (MPN): 91234
  • UPC: 734307912345

What’s Included

  • .416 Rigby Factory Crimp Die (1 1/4-12 thread)

Frequently Asked Questions

Will the .416 Rigby Factory Crimp Die fit my standard reloading press?

Not without checking first. This is a large-series die with a 1 1/4-12 thread rather than the standard 7/8-14 thread, so it's made for Lee's Classic Cast Press and similar large presses. If your press only has a 7/8-14 station, you'll need the right bushing or adapter, though some older presses actually have a removable insert that exposes 1 1/4-12 threads underneath.

Do my bullets need a crimp groove or cannelure to use this die?

No. The Lee Factory Crimp Die is powerful enough to crimp bullets that have no crimp groove at all. Testing has shown that even those bullets tend to shoot more accurately once crimped, because the higher start pressure makes for a more uniform pressure curve.

Why would I crimp a .416 Rigby load?

Big-bore dangerous-game rounds generate heavy recoil, which can push bullets deeper into the case or pull them loose in the magazine. A firm crimp keeps the bullet locked in place through recoil and rough field handling, so your rounds stay consistent and chamber reliably. For a cartridge like the .416 Rigby, that kind of bullet hold is a real benefit.

Is the .416 Rigby Factory Crimp Die hard to set up?

Not at all. You thread the die into your press, run a loaded cartridge up into it, and turn the die down until you reach the amount of crimp you want. It's a straightforward adjustment, and it won't buckle cases the way a roll crimp can if it's set wrong.

Additional information

UPC

734307912345

Manufacturer

Manufacturer Part Number

91234

Reviews

There are no reviews yet.

Be the first to review “Lee Precision .416 Rigby Factory Crimp Die (1 1/4-12 Thread) MPN 91234”