$16.99
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Marble Arms has been building iron sights in Gladstone, Michigan for over a century, and the 41-MR front sight carries that same all-steel, made-in-USA reputation. This one is the .410" tall ramp-style version wearing a gold bead measured at 3/32", which gives you a slightly larger, easier-to-pick-up dot than the finer 1/16" bead. The gold catches light nicely and pops in low woods light and bright field conditions alike, so you spend less time hunting for your sight and more time on target.
The MR designation means this is a ramp-style body, cut with a dovetail base that drops into a Marble Arms front sight ramp rather than mounting flat to the barrel. That makes it a natural match if you already run a Marble ramp or you're building a setup with the correct base. The .410" overall height is measured from the bottom of the dovetail to the top of the bead, which matters when you're pairing a front sight with a rear peep or notch and trying to land your point of impact where you want it.
Picking the right height is the whole game with iron sights. If your rifle prints high with the rear sight bottomed out, a taller front sight brings you back down, and Marble makes the 41-MR in a full range of heights so you can fine-tune the swap. It's a common upgrade on older lever guns and vintage sporters where the factory sight is gone, damaged, or just doesn't line up with a new peep.
These sights are steel through and through with Marble's signature contoured blade, and they've long been a favorite among precision-minded hunters. Like most dovetail sights, expect to do a little fitting during install. A few passes with a fine file on the dovetail is normal and gives you that snug, no-wiggle fit that keeps your zero honest.
The 41-MR is a ramp-style sight, meaning its dovetail base slides into a Marble Arms front sight ramp rather than mounting flat on the barrel. You drift it into the dovetail for a tight fit. If you don't already have a ramp base, you'll want to pair this with one that matches your barrel.
That is the overall height of the sight, measured from the bottom of the dovetail to the top of the gold bead. Height matters because it determines your point of impact when paired with a rear sight. Marble offers the 41-MR in several heights so you can adjust where your rifle shoots.
The 3/32" bead is a touch larger than the fine 1/16" version, so it's quicker and easier to pick up, especially in dim woods light or for older eyes. The gold color reflects light well and stands out clearly against most targets. It's a solid choice for hunting and general field use where fast acquisition beats fine precision.
Most likely, yes. Like nearly all dovetail sights, the 41-MR may run slightly oversized so you can file it down for a snug, wiggle-free fit. A few passes with a fine file on the dovetail usually does the trick, and it's always better to file the sight rather than the ramp or barrel.
| UPC | 871373002638 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 604121 |
| Color | Gold |
| Style | Ramp Mounted |
You must be logged in to post a review.
Reviews
There are no reviews yet.