Description
Loading something as big as the .408 CheyTac deserves a die that treats precision seriously, and Forster's XL Ultra Micrometer Seater does exactly that. This is the large-format version of Forster's well-respected Ultra line, built with a 1-1/4" thread body sized for the Forster Co-Ax XL press and other presses cut for the bigger cartridges. The micrometer head lets you fine-tune seating depth in .001" increments, and you can split that down to about .0005" when you're chasing the lands. Once you find a setting a bullet likes, write it down and dial right back to it next session.
How the 408 CheyTac Ultra Seater Keeps Rounds Straight
The heart of this die is the sliding, caliber-specific chamber. Instead of only grabbing the case rim like a lot of seaters, it supports the full outside diameter of the case while holding the bullet and seating stem on the same axis. That tight, concentric channel is what gives you that straight-line, co-axial seating and keeps runout low. The seating stem contacts the bullet on the ogive rather than the tip, so it plays nice with long VLD-style projectiles that the CheyTac crowd tends to run.
Why the Micrometer Matters on a Cartridge This Big
With a case holding this much powder, small changes in seating depth move interior volume and pressure more than you'd think, so having a repeatable way to adjust it is a real advantage. The micrometer takes the guesswork out: seat a bullet close, measure it, then turn the head to land exactly where you want. The markings are large and easy to read, which matters when you're trying to track tiny movements. It's a non-crimping seater, so it's focused purely on getting the bullet set clean and consistent.
Forster has a long reputation for tight tolerances and solid machining, and this XL seater carries that same build quality into the oversized class. For anyone running a .408 CheyTac and wanting match-grade consistency round after round, this is the seater that earns its spot on the bench.
Key Specifications
- Cartridge: 408 CheyTac
- Die Style: XL Ultra Micrometer Bullet Seating Die
- Thread Size: 1-1/4"
- Adjustment Increments: .001" (fine-tunable to approximately .0005")
- Seating Type: Non-crimping, straight-line (co-axial)
- Stem Contact: Bullet ogive
- Material: Steel
- Press Compatibility: Forster Co-Ax XL and other 1-1/4" threaded presses
- Manufacturer: Forster Products
- Manufacturer Part Number: 007525
- UPC: 757253990076
What’s Included
- Forster 408 CheyTac XL Ultra Micrometer Seater Die
- Forster Deluxe Die Box
- User instructions
Frequently Asked Questions
Will this 408 CheyTac seater die fit a standard reloading press?
No. This is an XL die with a 1-1/4" thread, which is larger than a standard reloading die. It's built for the Forster Co-Ax XL press and other presses threaded for the big cartridges, so you'll want to confirm your press accepts the 1-1/4" thread before loading.
How fine can I adjust seating depth with the Ultra Micrometer?
The micrometer head moves in clearly marked .001" increments, and there's enough room between the lines to split adjustments down to roughly .0005". That makes it easy to chase the lands and repeat a setting exactly once you record it.
Does this die crimp the case?
No, it's a non-crimping seater focused purely on seating the bullet straight and consistent. If you want a crimp, you'd add a separate crimp die to your process.
Will it work with long VLD-style bullets?
Yes. The seating stem contacts the bullet on the ogive rather than the tip, which keeps alignment true and makes it well suited to the long, high-BC projectiles common in .408 CheyTac loads.




Reviews
There are no reviews yet.