0
0

Lee Precision .38 Special/.357 Magnum Undersized Carbide Sizing Die

UPC: 734307905910

$22.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you reload a lot of .38 Special or .357 Magnum and want your finished rounds to drop into the cylinder every single time, Lee's undersized carbide sizing die earns its keep. This is the standalone sizing die, part number 90591, and it works the brass a touch harder than a regular carbide sizer to give you a cleaner, more consistent case.

What the .38/.357 Undersized Carbide Die Actually Does

Lee builds these undersized dies to size brass between .002" and .003" smaller than their standard carbide sizing dies. That extra squeeze brings the case diameter back down tight, which translates to firmer, more uniform neck tension on your seated bullets. A lot of reloaders notice better consistency and tighter groups out of ammo run through one of these, and the smaller sized brass chambers reliably round after round.

Carbide Where It Counts

The heart of this die is a solid carbide sizing ring ground to a special contour that won't leave a belt mark on your cases. Because carbide is so hard, you don't need case lube to run your brass through it, and the die will actually burnish the case and clean up the finish as it sizes. Skip the lube if you want, though a light touch of it does make the stroke a little smoother on high-volume sessions. Carbide holds its shape and resists scratches and nicks, so this is one of those tools you buy once and pass down.

Fitting It Into Your Setup

This die uses the standard 7/8"-14 thread, so it threads into any common single stage, turret, or progressive press without fuss. It's the sizing die only, so there's no shell holder in the box. If you already own a .38/.357 die set and just want that extra bit of sizing for better feeding and neck tension, dropping this one in as your first station is an easy upgrade. Made in the USA, same as the rest of Lee's lineup.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number (MPN): 90591
  • UPC: 734307905910
  • Caliber: .38 Special / .357 Magnum
  • Die Type: Undersized Carbide Sizing Die (sizing die only)
  • Sizing: .002" to .003" smaller than standard Lee carbide sizing dies
  • Sizing Insert Material: Solid carbide
  • Thread Size: 7/8"-14
  • Case Lube Required: No
  • Shell Holder Included: No
  • Number of Dies: 1
  • Length: 4.70 in
  • Country of Origin: USA

What’s Included

  • Lee .38 Special/.357 Magnum Undersized Carbide Sizing Die
  • Storage container

Frequently Asked Questions

How much smaller does this undersized carbide die size my brass?

Lee grinds these undersized dies to size brass between .002" and .003" smaller than their standard carbide sizing dies. That extra bit of sizing tightens the case back down for firmer neck tension and more dependable chambering. For .38 Special and .357 Magnum reloaders chasing consistency, that small difference adds up.

Do I need case lube to run brass through this carbide die?

No, carbide dies don't require case lubricant, which is a big part of why they're so popular for straight-walled pistol brass. The carbide ring will even burnish the case and clean up the finish as it sizes. A light coat of lube is optional and just makes the stroke a little smoother during long sessions.

Does the .38/.357 undersized carbide sizing die come with a shell holder?

No, this is the sizing die only and no shell holder is included. You'll need the correct shell holder for .38 Special/.357 Magnum to run it on your press. If you already reload these calibers you likely have the right one on hand.

Will this die work on my press?

Yes, it uses the standard 7/8"-14 thread, so it fits common single stage, turret, and progressive presses. It's designed to run as your sizing station, and it pairs well with an existing Lee .38/.357 die set when you want tighter neck tension and feeding reliability.

Additional information

UPC

734307905910

Manufacturer

Manufacturer Part Number

90591

Caliber/Gauge

.357 Magnum

Length

4.7000

Product Type

CABINE SIZR ONY

Reviews

There are no reviews yet.

Be the first to review “Lee Precision .38 Special/.357 Magnum Undersized Carbide Sizing Die”