0
0

Hornady 38 Special / 357 Magnum Bullet Seating Die #3 – 044145

UPC: 090255441451

$29.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Anyone loading .38 Special or .357 Magnum knows the seating step is where accuracy is won or lost, and this Hornady Custom Grade die is built to get it right every time. It handles .38 Special, .357 Magnum, and .357 Remington Maximum, all sharing the same .357 bullet diameter, so one die covers a lot of ground on the bench. The heart of it is Hornady's in-line seating system, which holds the bullet, case neck, and seating stem in perfect alignment inside the floating sleeve before the bullet ever enters the case. That means less runout, straighter ammo, and no fussing with hand-aligning each round.

What Sets the Hornady Seating Die Apart

This die uses a floating bullet alignment sleeve and a floating steel seating stem to line everything up below the die body for high concentricity. The result is benchrest-style consistency without the extra effort. A seater adjustment screw lets you set your exact seating depth, and the compression lock O-ring gives you the tension to make fine adjustments and hold your setting in place.

Crimp It or Skip It on the 38 / 357 Die

There's a built-in crimp feature that you can use or ignore depending on your load. You can apply a roll or taper crimp at the same time you seat the bullet, which is handy for revolver rounds that need a solid crimp to fight bullet jump under recoil, or you can back it off and run no crimp at all. That flexibility makes it just as comfortable loading light plinking .38s as it is stout .357 Magnum hunting rounds.

Built to Outlast Your Press

Hornady's Custom Grade dies are machined from select heat-treated steel with a polished internal profile, so cases feed in and out without sticking or dragging. The Sure-Loc lock ring clamps around the full die to hold your setting, and the retainer ring pops off in seconds for cleaning with no special tools. It ships with that lock ring already installed and tucked in Hornady's plastic storage box, ready to thread into your single-stage or progressive press.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 044145
  • UPC: 090255441451
  • Die Style: Bullet Seating Die
  • Die Series: Custom Grade New Dimension
  • Calibers: .38 Special / .357 Magnum / .357 Remington Maximum
  • Bullet Diameter: .357
  • Die Number: No. 3
  • Crimp Type: Built-in roll or taper crimp, optional use
  • Lock Ring: Sure-Loc lock ring, installed
  • Thread: 7/8-14
  • Material: Heat-treated steel, polished internal profile

What’s Included

  • Hornady 38 Special / 357 Magnum bullet seating die
  • Sure-Loc lock ring (installed)
  • Hornady plastic storage box

Frequently Asked Questions

What cartridges will this Hornady seating die load?

It's set up for .38 Special, .357 Magnum, and .357 Remington Maximum, since all three use the same .357 bullet diameter. That makes it a versatile pick if you shoot more than one of those rounds. Keep in mind this is the seating die only, not a full die set.

Can I crimp with the 38 / 357 seating die at the same time I seat the bullet?

Yes. The die has a built-in crimp feature you can use to apply a roll or taper crimp while seating in the same stroke. You can also back it off and run no crimp at all, which gives you the freedom to match the crimp to your specific load.

Is this a complete die set or just the seating die?

This is the standalone bullet seating die, part number 044145. It does not include a sizing or expander die, so you'll want those separately if you're building a full reloading setup for .38 Special or .357 Magnum. Many reloaders add individual dies like this to round out or replace pieces of an existing set.

Does the Hornady seating die work on progressive presses?

It does. The die uses standard 7/8-14 threads, so it fits single-stage and progressive presses alike. The Sure-Loc lock ring helps keep your depth setting locked in once you've got it dialed.

Additional information

UPC

090255441451

Manufacturer

Manufacturer Part Number

044145

Reviews

There are no reviews yet.

Be the first to review “Hornady 38 Special / 357 Magnum Bullet Seating Die #3 – 044145”