0
0

Hornady 375 Caliber Neck Turning Mandrel (.373″) – 391932

UPC: 090255919325

$11.99

12 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Neck turning is one of those prep steps that separates good handloads from great ones, and it all starts with a mandrel that fits your caliber dead on. This Hornady Neck Turning Mandrel is sized for .375 caliber with a 0.373" diameter, giving your case necks the proper internal support while the cutter shaves the outside down to a uniform thickness. Slide a case over it and the neck is held true to the tool, which is exactly what you want when you're chasing consistent neck tension and tighter groups.

What the .375 Mandrel Does at the Bench

Think of this mandrel as the backbone of the operation. It indexes the case neck so the cutting blade removes an even layer all the way around, eliminating the thick-and-thin spots that come baked into a lot of factory brass. Even neck walls mean the bullet releases the same way shot after shot, and that uniformity is where accuracy lives. For anyone loading big .375 cartridges where brass runs pricey and every bit of precision counts, that even turn pays off.

Fitting the Hornady 375 Neck Turning Mandrel to Your Setup

This mandrel is built specifically for the Hornady Neck Turn Tool, which is sold separately. Keep in mind the Neck Turn Tool ships with mandrels for 22 Cal, 6mm, 6.5mm, and 30 Cal, so the .375 size is an add-on you'll grab when you start working this caliber. It's a steel piece with a clean silver finish, made in the USA, and it swaps in and out of the tool in seconds.

If you already run the Hornady Neck Turn Tool and you're reloading anything in the .375 family, this is the piece that gets you there. Pick up the matching mandrel, dial in your cut, and let your brass do the rest.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 391932
  • UPC: 090255919325
  • Caliber: 375 Caliber
  • Mandrel Diameter: 0.373"
  • Material: Steel
  • Finish: Silver
  • Quantity: 1 Mandrel
  • Compatibility: Hornady Neck Turn Tool (sold separately)
  • Made in USA: Yes

What’s Included

  • One (1) Hornady 375 Caliber Neck Turning Mandrel (.373")

Frequently Asked Questions

What does the 375 neck turning mandrel do?

The mandrel supports the inside of the case neck while the Hornady Neck Turn Tool shaves the outside to a uniform thickness. This keeps the neck aligned and true to the cutter, so the brass is removed evenly all the way around. Even neck walls give you more consistent neck tension and bullet release, which translates to better accuracy.

Does this mandrel come with the Hornady Neck Turn Tool?

No. The Hornady Neck Turn Tool includes mandrels for 22 Cal, 6mm, 6.5mm, and 30 Cal, but the .375 size is not one of them. You'll want to add this mandrel separately if you're turning necks on .375 caliber brass.

Do I need the Neck Turn Tool to use this mandrel?

Yes. This is a caliber-specific mandrel designed to work with the Hornady Neck Turn Tool, which is sold separately. On its own the mandrel won't turn necks, but paired with the tool it handles .375 caliber brass.

What diameter is the 375 caliber mandrel?

This mandrel measures 0.373" in diameter, sized for .375 caliber cases. That dimension provides the proper internal support so the neck is held firmly against the cutting blade for an even, consistent turn.

Additional information

UPC

090255919325

Manufacturer

Manufacturer Part Number

391932

Caliber/Gauge

375 Caliber

Reviews

There are no reviews yet.

Be the first to review “Hornady 375 Caliber Neck Turning Mandrel (.373″) – 391932”