Description
If you reload .357 Magnum or just want a quick way to verify your range ammo, the EGW 7-Hole Cartridge Checker is one of those simple tools that earns its spot on the bench in a hurry. It's a solid block of aluminum with seven holes bored to SAAMI minimum chamber dimensions, so you drop your rounds in, see if they sit flush, and know in seconds whether they're good to go. No guesswork, no surprises when you load up a cylinder.
How the .357 Magnum Cartridge Checker Works
The idea here is dead simple. Drop a loaded round or a resized case into one of the seven holes. If it sits flush with the surface, the round is within spec and will chamber. If something is sticking up, you've caught a problem round before it causes a jam, a misfire, or worse at the range. Because the gauge measures minimum case diameter and maximum overall length, it flags both oversized brass and rounds seated too long. You can check seven at a time, which speeds things up considerably when you're working through a big batch.
What Sets the EGW 7-Hole Design Apart
A lot of companies cut their chamber checkers with boring bars. EGW machines these with the actual Clymer reamers used to cut real barrel chambers, so the holes mirror what your firearm's chamber is going to see. The body is machined from solid 6061 T6 aircraft grade aluminum and finished in matte black anodizing, so it shrugs off bench abuse and resists corrosion over the long haul. At roughly 3 inches long and 1.25 inches wide, it's compact enough to toss in a range bag or tuck into a corner of your loading area.
Whether you're loading match ammo, working up hunting loads, or just double-checking a box of factory .357 Mag before a day of shooting, this checker takes the uncertainty out of it. It's the kind of tool you buy once and keep forever.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 70122
- UPC: 841370107643
- Caliber: .357 Magnum
- Capacity: 7 holes
- Material: 6061 T6 Aircraft Grade Aluminum
- Finish: Matte Black Anodized
- Machined With: Clymer Chamber Reamers
- Spec: SAAMI Minimum
- Length: 3 in
- Width: 1.25 in
- Height: 1.59 in
- Made In: USA
What’s Included
- EGW .357 Magnum 7-Hole Cartridge Checker Case Gauge
Frequently Asked Questions
How do I use the .357 Magnum 7-hole cartridge checker?
Drop a loaded round or resized case into one of the seven holes. If it sits flush with the surface of the gauge, it's within spec and will chamber. If it protrudes, you've got an out-of-spec round to set aside and correct before heading to the range.
Will this EGW checker work for .38 Special?
This particular gauge is machined specifically for .357 Magnum. If you want to check .38 Special rounds as well, EGW makes a separate 50-hole .357 Magnum gauge that works for both, since .38 Special shares the same case diameter. For dedicated .357 Magnum checking, this 7-hole model is the one you want.
What makes EGW chamber checkers different from cheaper gauges?
Instead of using boring bars like some manufacturers, EGW cuts these holes with the same Clymer reamers used to chamber actual barrels. That means the gauge mirrors what your real chamber sees, and it's machined to SAAMI minimum spec so your ammo is verified against a tight chamber. The 6061 T6 aluminum body and anodized finish hold up for years of use.
Can I use this on factory ammo or just reloads?
Both. Reloaders rely on it to verify resized brass and finished rounds, but it's just as handy for spot-checking factory .357 Magnum before a match or hunt. If a round sits flush, you know it'll chamber cleanly.



Reviews
There are no reviews yet.