0
0

Redding 338 Lapua Magnum Competition Bushing Neck Die Set

UPC: 611760585944

$495.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading .338 Lapua Magnum for long range work, the Redding Competition Bushing Neck Die Set is about as refined as reloading gear gets. This is a three-die set built for the handloader who sorts brass, chases tight groups, and wants repeatable results every session. Inside the box you get a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Seating Die, each built to the alignment standards that made Redding's Competition Series a favorite among precision crowds.

How the Redding Competition Bushing Neck Set Works

Both the bushing neck die and the seating die use a precision ground sliding sleeve that captures and aligns the case before any work begins. On the sizing side, the case stays supported in a tight sliding sleeve while the bushing self-centers on the neck, which keeps neck and bullet runout to a minimum. The seating die is dialed in to the point where the bullet guide to seating stem fit is tight enough that the stem floats on a column of air. Both dies feature micrometer adjustment heads, so you can fine-tune neck sizing and seating depth down to the mark and return to a favorite setting whenever you want.

Why the Body Die Earns Its Spot

Neck sizing keeps brass alive longer and preserves that fire-formed fit to your chamber, but eventually cases need a little attention down low. That's where the included Body Die comes in. It full length sizes the case body and bumps the shoulder back to the amount you set, so cases that have gotten stiff to chamber slide right back in without disturbing the neck you worked so hard to tune.

Built for Sorted and Neck-Turned Brass

This set is designed with the serious loader in mind. Because it relies on interchangeable bushings to set neck tension, it shines with brass that has been sorted for neck thickness or neck turned for uniformity. Keep in mind that neck sizing bushings are sold separately, which lets you pick the exact diameter your load calls for. A shellholder is also sold separately. To find the right bushing, measure the neck diameter of a loaded round and subtract about .001 inch to allow for spring back and a proper bullet fit.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 58594
  • UPC: 611760585944
  • Cartridge: .338 Lapua Magnum
  • Die Set Type: Competition Bushing Neck (3-Die Set)
  • Dies Included: Competition Bushing Neck Sizing Die, Body Die, Competition Seating Die
  • Adjustment: Micrometer heads on neck sizing and seating dies
  • Thread: 7/8-14
  • Bushings: Sold separately
  • Shellholder: Sold separately (#35)
  • Seating Stem: Standard stem included; VLD stem available separately

What’s Included

  • Competition Bushing Neck Sizing Die
  • Body Die
  • Competition Seating Die (with standard seating stem)

Frequently Asked Questions

Does the Redding 338 Lapua Competition Bushing Neck Die Set come with bushings?

No, the neck sizing bushings are sold separately so you can match the exact neck tension your load calls for. The easiest way to find the right one is to measure the neck diameter of a loaded or dummy round and subtract about .001 inch to allow for spring back. Bushings for .338 Lapua Magnum are available in .001 inch increments.

Is a shellholder included with this die set?

The shellholder is sold separately. The .338 Lapua Magnum uses the #35 standard shellholder with Redding presses. It's worth grabbing one at the same time if you don't already have it on the bench.

What's the Body Die for in this set?

The Body Die full length resizes only the case body and bumps the shoulder back to the amount you set, without touching the neck. This keeps cases chambering smoothly after repeated neck-only sizing. It gives you the flexibility to neck size for accuracy and still reset shoulder bump when brass gets tight.

Is this set a good fit for neck-turned or sorted brass?

Yes, this set is built exactly for that kind of precision work. Because a size button is not included and it relies on bushings to set neck tension, it performs best with brass that has been sorted for thickness uniformity or neck turned. If you're running mixed commercial brass straight out of the bag, a Type S neck die with a size button may suit you better.

Additional information

UPC

611760585944

Manufacturer

Manufacturer Part Number

58594

Reviews

There are no reviews yet.

Be the first to review “Redding 338 Lapua Magnum Competition Bushing Neck Die Set”