Description
These Swampfox Freedom Rings are the no-nonsense way to get a 30mm tube optic locked onto a Picatinny rail. Sold as a matched pair with a low 1.1" centerline height, they're machined from 7075 aluminum, the same alloy used in AR-15 receivers, then given a hardcoat oxidized finish that shrugs off scratches and corrosion. That means your rings are built from the same tough stuff as your rifle, and they'll hold up to the kind of beating a working gun takes.
What Makes the Freedom Rings Worth a Look
The whole point of a good ring set is a rock-solid, repeatable hold, and these deliver. CNC machining keeps the pair matched so your scope tube sits true with no binding or stress on the body. The non-slip clamping surface grips the rail and the tube, so once you torque them down there's no slipping or shifting when the rifle starts barking. For reference, Swampfox calls for 10 inch-pounds on the T10 star ring cap screws and 30 inch-pounds on the Picatinny base screws, which takes the guesswork out of install.
Dialing In the Right Height with These 30mm Rings
That 1.1" centerline height is on the low side, which works well for bolt guns and hunting rigs where you want the scope sitting close to the bore for a cleaner cheek weld. On a flat-top AR you'll want to confirm your objective and ocular clear the rail and handguard before committing, since a low mount pairs best with smaller objective scopes. If you're running a big 56mm bell or need a higher head position on an AR, Swampfox makes the same ring in 1.6" and 1.93" heights too.
Bottom line, these are honest-to-goodness workhorse rings at a fair price. They're universal across any standard 1913 rail, so they'll move from rifle to rifle as your setup changes, and the 7075 build means you're not babying them out in the field.
Key Specifications
- Manufacturer: Swampfox
- Model: Freedom Rings
- Manufacturer Part Number: SFR-30-M
- UPC: 889157001500
- Tube Diameter: 30mm
- Centerline Height: 1.1 in (Low)
- Material: 7075 Aluminum
- Finish: Hardcoat Oxidized, Matte Black
- Base/Mount Type: 1913 MIL-STD Picatinny
- Ring Quantity: Matched Pair
- Ring Cap Screws: T10 Star, 10 in-lbs torque
- Base Screw Torque: 30 in-lbs
- Color: Black
- Fit: Universal / Multi
What’s Included
- One matched pair of Swampfox Freedom Rings (30mm, 1.1" low)
- Mounting hardware (T10 ring cap screws and Picatinny base screws)
Frequently Asked Questions
Will these Freedom Rings fit my scope?
They're built for scopes with a 30mm main tube, so check your scope's tube diameter before ordering. The 1.1" centerline height is on the low side, which pairs best with smaller objective bells. If you have a large 50mm or 56mm objective, measure for clearance or step up to a taller ring height.
What rail do these mount to?
The Freedom Rings clamp to any standard 1913 MIL-STD Picatinny rail. That makes them universal across most modern rifles with a flat-top receiver or a rail-equipped bolt gun. They are not made for dovetail or Weaver-only bases.
Are these a good choice for an AR-15?
They'll work on a flat-top AR, but keep in mind the 1.1" height is low. On an AR you often want a taller mount for a comfortable head position and objective clearance over the handguard, so many AR builds go with the 1.6" or 1.93" versions of this ring instead. For a bolt-action or hunting rifle, the low 1.1" height is right at home.
What are the Freedom Rings made of and will they hold zero?
They're CNC machined from 7075 aluminum, the same tough alloy used in AR-15 receivers, with a hardcoat oxidized finish that resists scratches and corrosion. The matched-pair design and non-slip clamping surface keep your optic locked in place with no shifting. Torque the ring caps to 10 inch-pounds and the base screws to 30 inch-pounds and your zero stays put.



Reviews
There are no reviews yet.