Description
If you run a 30mm optic and want a mount that disappears into your build while holding dead zero, MDT's Premier Scope Rings are a smart pick. These are the low-height version, giving you 0.82 inches measured from the top of the rail to the centerline of the scope, which is a great fit for low-profile optics or anyone chasing a cheek weld that lines up right. The whole set is machined from billet 6061 aluminum and comes in a clean matte black finish.
What Makes the MDT Premier Rings Different
MDT builds these to STANAG 4694 spec, better known as NATO spec. In plain terms, the ring seats tight against the top of the rail while pressure loads onto the angled sides, which creates a seriously stable interface and even lets the rings sit on rails that are a touch out of spec. They mount to both STANAG and MIL-STD-1913 Picatinny bases, so you're covered on just about any precision setup. MDT also CMM checks these to 1.5 millionths of an inch, which is the kind of tolerance you want when repeatability matters.
Dialing In Your 30mm Low Rings
Each ring uses four oversized #8-32 Grade 8 fasteners to clamp the scope, and the stepped base-to-cap interface lets you snug down one side before you make your final alignment tweaks. That little detail makes leveling your reticle a lot less fiddly. One thing worth knowing: the low 0.82" rings do not have a built-in bubble level, so you'll want a level handy during install. No lapping required either.
Light Enough for the Long Haul
The full low-height set tips the scale at right around 4 ounces, which is why these have become a favorite with backcountry hunters and PRS folks who hoof their rifles around. You get the holding power of a beefy steel mount without the extra weight riding up top. Feedback from folks running them tends to point to the same thing: clean machining, a precise fit, and rings that just stay put.
Key Specifications
- Manufacturer: MDT (Modular Driven Technologies)
- Model: Premier Scope Rings
- Manufacturer Part Number: 103346-BLK
- UPC: 990482717766
- Scope Tube Diameter: 30mm
- Ring Height: Low – 0.820"
- Material: Billet 6061 Aluminum
- Finish: Matte Black (Anodized)
- Fasteners: Four oversized #8-32 Grade 8 per ring clamp
- Weight: Approx. 4 oz (set)
- Rail Compatibility: STANAG and MIL-STD-1913 Picatinny
- Spec: STANAG 4694 (NATO spec)
- Precision: CMM checked to 1.5 millionths of an inch
- Ring Quantity: Pair
- Country of Origin: Canada
What’s Included
- Pair of MDT Premier 30mm Low (0.82") scope rings
- All necessary mounting and clamping hardware
Frequently Asked Questions
What optics do these MDT 30mm low rings fit?
These rings are built for scopes with a 30mm main tube, which covers a huge chunk of the hunting and precision optics on the market. At the low 0.82" height, they pair best with smaller objective bells or anyone wanting the scope mounted as close to the bore as possible. Always check your objective diameter clears the barrel before committing to low rings.
Do the MDT Premier low rings have a built-in bubble level?
No. The low 0.82" height rings do not include a built-in bubble level, which is reserved for the medium, high, and extra-high versions. Keep a separate level on hand to get your reticle squared away during install.
Will these rings mount to a Picatinny rail?
Yes. The Premier rings are made to STANAG 4694 spec and will clamp to both STANAG and MIL-STD-1913 Picatinny bases. The design even allows mounting on rails that are slightly out of spec, so you get a solid interface across a wide range of setups.
Is lapping required on the MDT Premier scope rings?
No lapping is required. MDT CMM checks these to 1.5 millionths of an inch and machines the base and clamp interfaces to tight tolerances, so the rings come ready to mount right out of the package. Just torque them to spec and you're good to go.





Reviews
There are no reviews yet.