Description
If you handload 300 WSM and chase the tightest groups your rifle can give, the Redding Competition Bullet Seating Die earns its spot on the bench. This is the die reloaders reach for when concentricity matters, and its patented floating seating stem design has long been considered the benchmark for straight-line seating. The stem is precision ground to match bullet diameter so closely that it rides on a thin cushion of air, which keeps the bullet aligned with the case neck as it goes in.
What Sets the Redding 55223 Competition Die Apart
Before the bullet ever starts moving, the case and projectile are fully supported inside a close-fitting, precision ground sleeve. That full support is the secret behind the low runout numbers this die is known for. Everything stays aligned through the entire seating stroke, so you get straighter rounds and more consistent bullet-to-bore alignment downrange. It threads 7/8 x 14 like a standard die, so it drops right into single-stage, turret, or progressive presses without any fuss.
Dialing In Seating Depth With the Micrometer
The micrometer head is calibrated in .001 inch increments and adjusts infinitely without clicks, which makes fine-tuning your overall length a simple, repeatable process. There's also a zero-set feature that lets you record a favorite seating depth, so jumping between loads or returning to a proven recipe is quick and foolproof. If you load multiple bullet weights or work up to the lands on a particular rifle, that repeatability saves a lot of guesswork.
One thing worth knowing up front: this is a seating die only and does not crimp. Most precision 300 WSM shooters don't crimp anyway, but if your load calls for it you'll want to add a separate crimp die. The 55223 is proudly made in the USA and built to hold its precision through years of loading.
Key Specifications
- Manufacturer: Redding
- Model: Competition Bullet Seating Die
- Manufacturer Part Number: 55223
- UPC: 611760552236
- Cartridge: 300 WSM (Winchester Short Magnum)
- Die Type: Bullet Seating Die (Seat Only)
- Adjustment: Micrometer, .001 inch increments, no clicks
- Thread Size: 7/8 x 14
- Number of Dies: 1
- Crimp: No (seating only)
- Press Compatibility: Single-stage, turret, and progressive
- Country of Manufacture: United States
What’s Included
- Redding Competition Bullet Seating Die for 300 WSM (1 die)
Frequently Asked Questions
Does the Redding 300 WSM Competition Seating Die crimp the bullet?
No, this is a dedicated seating die and does not apply a crimp. If your load requires a crimp, you'll need to purchase a separate crimp die. Most precision 300 WSM reloaders run their bottleneck rounds without a crimp anyway.
Is a shellholder included with the 55223 seating die?
No, a shellholder is not included and is sold separately. You'll want the correct shellholder for the 300 WSM case head, which uses the same size as other WSM and short magnum cartridges.
Will this competition seating die fit a progressive press?
Yes. It uses standard 7/8 x 14 threads, so it fits single-stage, turret, and progressive presses. The top-mounted micrometer is especially handy on progressive tool heads where space is tight.
How does the micrometer make seating depth more consistent?
The micrometer head is calibrated in .001 inch increments and adjusts smoothly without clicks, so you can set overall length precisely. A zero-set feature lets you record a favorite seating depth and return to it exactly, which makes switching between loads quick and repeatable.




Reviews
There are no reviews yet.