0
0

Redding 30 Caliber Small Stainless Pilot Stop 06139 for 9/64″ Mandrel

UPC: 611760061394

$10.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're running a Redding Case Neck Gauge or the Small Flash Hole Deburring Tool and working with 30 caliber brass that uses small (.060") flash holes, this is the pilot stop you need to make it all line up. It's the small-mandrel version (06139), machined for 9/64" mandrels, so don't confuse it with the standard 3/16" mandrel stop. Each caliber needs its own stop, and this one is cut specifically for the .30 bore.

The whole job of a pilot stop is to index off the case mouth and hold the brass centered and steady while the mandrel and cutter do their work. Slide the small end into the case mouth, run the mandrel through until the alignment pin shows through the flash hole, and lock it down with the set screw. That consistency is what keeps your neck wall readings honest and your flash hole deburring from biting too deep or wandering off center.

What the 30 Cal Small Pilot Stop Brings to the Bench

These are precision CNC-machined from stainless steel, so they shrug off corrosion and hold their dimensions session after session. Stainless also means no babying it with oil or worrying about surface rust creeping in from humidity on the bench. It's a simple part, but the tolerances are what make your prep tools repeatable.

Making Sure the 9/64" Mandrel Stop Fits Your Setup

This stop is built around the 9/64" small mandrel, which is what Redding uses for cases with small .060" flash holes and for the .17 and .20 cal tools. If your 30 caliber brass is set up on a small mandrel, this is your match. Reloaders chasing match-grade consistency tend to keep a stop on hand for every cartridge they prep, and adding the correct one for your setup keeps swap-overs quick and your measurements trustworthy.

From a brand standpoint, Redding has a long reputation for making case prep gear that just works and lasts, and these pilot stops are a small but important piece of that system.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 06139
  • UPC: 611760061394
  • Caliber: .30 Caliber
  • Mandrel Size: 9/64" (small mandrel)
  • Material: CNC-machined stainless steel
  • Type: Pilot Stop (small)
  • Compatible Tools: Redding Case Neck Gauge and Flash Hole Deburring Tools
  • Intended Use: Cases with small (.060") flash holes

What’s Included

  • One Redding 30 Caliber Small Stainless Pilot Stop (06139)

Frequently Asked Questions

What's the difference between this small pilot stop and the standard 30 cal pilot stop?

This one (06139) is the small version made for 9/64" mandrels, while the standard 30 cal stop (06130) is built for the larger 3/16" mandrel. The small size is used for cases with small .060" flash holes and the .17 and .20 cal tools. Make sure you know which mandrel your setup runs before ordering so everything lines up correctly.

Which Redding tools does the 30 caliber pilot stop work with?

It's made for use with the Redding Case Neck Gauge and the Redding Flash Hole Deburring Tools. The stop centers your 30 caliber brass and indexes off the case mouth so the mandrel and cutter stay aligned. Keep in mind each caliber needs its own matching pilot stop.

How does the pilot stop actually work during case prep?

You insert the small end into the case mouth, slide the mandrel through until the alignment pin projects through the flash hole, then tighten the set screw to lock it in place. This holds the case steady and centered so your neck wall readings or flash hole deburring come out consistent from case to case. Setting it off a good, burr-free case gives you the most repeatable results.

Is the Redding pilot stop made of stainless steel?

Yes, it's precision CNC-machined from stainless steel. That gives you corrosion resistance and dimensional stability so it holds up to repeated use on the bench without rusting or wearing out of spec.

Additional information

UPC

611760061394

Manufacturer

Manufacturer Part Number

06139

Caliber/Gauge

.30 Caliber

Reviews

There are no reviews yet.

Be the first to review “Redding 30 Caliber Small Stainless Pilot Stop 06139 for 9/64″ Mandrel”