Description
Headspace is one of those things you can't eyeball, and getting it right is the difference between a rifle that shoots straight and one that gives you problems. This Forster No-Go gauge is the reference tool gunsmiths reach for when setting headspace on a rimmed 30-30 chamber. The idea is simple: with the No-Go gauge in the chamber, your bolt or action should not close. If it closes freely, the headspace is longer than Forster's recommended maximum for a fresh barrel install, which tells you to keep working the fit.
Forster has been building these gauges since 1935, and the quality shows. Each one is machined from hardened A2 tool steel and precision ground to tolerances within roughly fifteen ten-thousandths of an inch, so you're getting a genuine, repeatable measurement every time. On a rimmed cartridge like the 30-30, headspace is read off the rim rather than a shoulder or belt, and this gauge is dimensioned specifically for that.
Why the No-Go Gauge Matters When Fitting a 30-30 Barrel
A No-Go gauge sets the tight end of your window when you're chambering a new barrel. Forster recommends it for exactly that job, setting headspace during a barrel installation rather than checking an already assembled factory rifle. Paired with a Go gauge, you get a clear pass/fail on both ends and can dial a chamber in close, tight, and safe. Folks who swap barrels on lever guns like the Winchester 1894 tend to keep the full Go, No-Go, and Field set on the bench.
One 30-30 Gauge That Covers a Family of Rimmed Cartridges
Here's a nice bonus: because these calibers share the same rim and case head, this single gauge also checks a bunch of related chambers. Along with 30-30 WCF, it works for 25-35 WCF, 7-30 Waters, 30 Herrett, 303 Savage, 32 Winchester Special, 307 Win, 356 Win, 375 Win, 38-55 WCF, and more. If you tinker with vintage lever actions or single-shots, that versatility makes it one of the more useful gauges you can own.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: BG3030N
- UPC: 757253002854
- Caliber: 30-30 Winchester
- Gauge Type: No-Go
- Case Type: Rimmed
- Material: Hardened A2 Tool Steel
- Tolerance: Within 0.00015"
- Length: 1.5"
- Color: Steel
- Country of Origin: United States
- Quantity: 1
What’s Included
- One Forster 30-30 Winchester No-Go headspace gauge (BG3030N)
Frequently Asked Questions
How do I use the 30-30 No-Go headspace gauge?
Drop the gauge into the chamber and gently close the bolt or action. If it will not close, your headspace is within Forster's recommended maximum for a new barrel. If the action closes on the No-Go gauge, the headspace is longer than the gauge allows and you'll want to keep fitting.
Does this gauge work with more than just 30-30 Winchester?
Yes. Because it's built for the rimmed 30-30 case head, it also checks chambers for 25-35 WCF, 7-30 Waters, 30 Herrett, 303 Savage, 32 Winchester Special, 307 Win, 356 Win, 375 Win, and 38-55 WCF, among others. That makes it a handy tool for anyone working on vintage lever guns and single-shots.
Do I need a Go gauge too, or is the No-Go enough?
For a proper barrel fit you'll want both. The Go gauge confirms the chamber will accept full-length ammo, while the No-Go tells you the chamber isn't cut too long. Using them together lets you set headspace tight, safe, and repeatable.
Is the No-Go gauge meant for checking a used rifle?
Forster designed the No-Go gauge mainly for setting headspace when installing a new barrel, not as the final word on an already assembled gun. If you're evaluating a used rifle and it closes on a No-Go, a Field gauge is the tool that confirms whether the chamber is still within safe limits.




Reviews
There are no reviews yet.