Description
The Redding National Match Die Set in 30-06 Springfield is aimed squarely at the across-the-course and long-range crowd who demand consistency round after round. Instead of making you buy three dies separately like folks did for years at the NRA National Matches, Redding packaged the trio that matters most into one box. You get a full-length sizing die, a Competition bullet seating die, and a taper crimp die, all in a set marked with part number 39148.
What Each Die in the 30-06 National Match Set Does
The full-length sizing die is the non-bushing style and runs a carbide size button on the decapping rod assembly, which cuts down on neck drag and keeps case necks consistent. It sizes the body, shoulder, and neck so your brass drops into a minimum SAAMI chamber without a fight, which is exactly what you want when your rifle is a semi-auto or a tight-chambered match gun. The Competition seating die is the star of the show, using a floating seating stem that guides the bullet dead straight before the stem ever touches it, so runout stays low and seating depth stays repeatable with the micrometer adjustment.
Why the Taper Crimp Matters on a Gas Gun
For anyone running a Garand, M1A, or an AR-10 platform in 30-06, the separate taper crimp operation is a real benefit. A good taper crimp helps lock bullets in place against the rough ride of a semi-auto action without deforming the bullet or working the brass harder than it needs to. Keeping crimp as its own step gives you more control than a combined seat-and-crimp setup.
Built Like Every Redding Die
These are made from quality alloy steels, machined on precision lathes to tight tolerances, heat treated, hand polished, and ultrasonically cleaned before they ever hit the box. The dies use the standard 7/8"-14 thread, so they'll thread right into any common single-stage or turret press. The box itself doubles as a loading block with a spot for your shellholder, plus a spare decapping pin and hex wrench tucked inside.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 39148
- UPC: 611760391484
- Cartridge: 30-06 Springfield
- Set Type: National Match (NM-C) 3-Die Set
- Dies Included: Full Length Sizing, Competition Seating, Taper Crimp
- Number of Dies: 3
- Sizing Die Style: Non-bushing, full length
- Size Button: Carbide
- Seating Adjustment: Micrometer
- Bullet Diameter: 0.308 in
- Material: Alloy steel
- Thread: 7/8"-14 standard
- Standard Shellholder: #1
- Country of Origin: USA
What’s Included
- Full Length Sizing Die with carbide size button
- Competition Bullet Seating Die (micrometer)
- Taper Crimp Die
- Spare decapping pin
- Hex/Allen wrench
- Die box with shellholder storage
Frequently Asked Questions
What dies come in the Redding 30-06 National Match set?
This set includes three dies: a full-length sizing die with a carbide size button, a Competition bullet seating die with a micrometer and floating seating stem, and a taper crimp die. It does not use interchangeable bushings in the sizing die. A spare decapping pin and hex wrench are packed in the box as well.
Is the 30-06 National Match set a good choice for a Garand or M1A?
Yes, it's a strong fit for gas-operated rifles like the M1 Garand, M1A, and AR-10 platforms chambered in 30-06. The full-length sizer brings brass back to minimum SAAMI dimensions so rounds feed reliably, and the separate taper crimp die helps keep bullets secure through a semi-auto's cycling. That combination is why this set has long been popular with across-the-course and long-range match shooters.
Will these dies fit my reloading press?
They use the standard 7/8"-14 thread, so they'll thread into virtually any common single-stage or turret press. The set is built around a #1 shellholder for 30-06, which you'll want on hand if you don't already have one.
What makes the Competition seating die different from a standard seater?
The Competition seating die uses a spring-loaded sleeve and a floating seating stem that aligns the bullet and case before the bullet is seated, which keeps runout low and seating depth consistent. The micrometer top lets you dial in and return to an exact seating depth. It's the same seater many precision loaders have bought on its own for years.





Reviews
There are no reviews yet.