0
0

Forster 284 Winchester Ultra Micrometer Seater Die (U00089)

UPC: 757253996207

$118.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Forster's Ultra Micrometer Seater Die in .284 Winchester is built for folks who care about every thousandth of an inch. It takes everything that made the original Bench Rest seater a benchmark for straight-line seating and adds a micrometer head on top, so adjusting seating depth is a matter of turning a dial instead of guessing with a locknut and a prayer.

What Makes the Forster Ultra Micrometer Seater Die Different

The heart of this die is a spring-loaded sliding chamber sleeve that fully captures the case before the bullet ever starts moving. That means the case and bullet stay in perfect alignment through the whole seating stroke, which is where low runout comes from. Reloaders who measure concentricity regularly report runout numbers down in the half-thousandth to one-and-a-half thousandth range, which is about as tight as it gets without going full custom. This is a non-crimping seater, so it focuses purely on clean, aligned bullet seating.

Dialing In Your .284 Win Loads

The micrometer head adjusts seating depth in .001 inch increments, and you can split that down to about .0005 inch when you're really chasing the lands. Crisp white hash marks on the dial make it easy to read and, just as important, easy to record. Seat a bullet close, measure it, then turn the stem to the exact number you want and you're there. If you run different bullets through the same rifle, write down the optimal setting for each one and you can return to it anytime without re-doing all the trial and error.

Fit and Use

This die threads into standard 7/8-14 presses and adapts to most common presses on the market. In a non-Forster press you'll use the shellholder your press maker recommends; if you're running a Forster Co-Ax, no shellholder is needed. It's made in the U.S.A. and sized specifically for the .284 Winchester case.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number (MPN): U00089
  • UPC: 757253996207
  • Caliber: .284 Winchester
  • Die Type: Bullet Seating Die
  • Die Series: Bench Rest Ultra Micrometer
  • Adjustment: Micrometer head, .001" increments (down to .0005")
  • Crimp: Non-crimping
  • Alignment: Spring-loaded sliding chamber sleeve
  • Thread: 7/8-14
  • Gun Type: Rifle
  • Country of Origin: Made in U.S.A.

What’s Included

  • One Forster Bench Rest Ultra Micrometer Seater Die
  • One Forster split-type lock ring
  • Storage case
  • Complete instructions

Frequently Asked Questions

Does the Forster 284 Winchester Ultra Micrometer Seater Die crimp the case?

No, this is a non-crimping seater die. It's designed to hold the bullet and case in alignment and seat the bullet cleanly, without applying a crimp. If you need a crimp, you'd add a separate crimp die to your process.

How fine can I adjust the seating depth?

The micrometer head moves in .001 inch increments, and you can fine-tune to roughly .0005 inch in either direction. The white hash marks make it easy to read and record your settings, which is handy if you switch between different bullets in the same rifle.

Will this die fit my press?

It uses a standard 7/8-14 thread and adapts to most common reloading presses. In a non-Forster press, use the shellholder recommended by your press manufacturer. If you run a Forster Co-Ax, you won't need a shellholder at all.

Is a sizing die included with this seater die?

No, this is a standalone seater die, not a full die set. You'll need a separate sizing die for the .284 Winchester. A shellholder is also sold separately unless you're using a Forster Co-Ax press.

Additional information

UPC

757253996207

Manufacturer

Manufacturer Part Number

U00089

Reviews

There are no reviews yet.

Be the first to review “Forster 284 Winchester Ultra Micrometer Seater Die (U00089)”