0
0

Redding 280 Remington Competition Bushing Neck Die Set 58142

UPC: 611760581427

$322.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding Competition Bushing Neck Die Set in 280 Remington is built for the handloader who treats every round like it matters. This is Redding's top-tier bushing neck setup, the kind of gear that comes straight out of the benchrest and long-range competition world. Inside the box you get three dies working together: a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seating Die. The neck sizer and the seater both use micrometer heads, so you can dial in exact neck tension and seating depth, write down the numbers, and return to a favorite load later without guesswork.

What Sets the 280 Remington Competition Bushing Neck Die Set Apart

The magic here is in the floating sleeve design. On the bushing neck sizer, the case is fully captured and aligned in a close-fitting sliding sleeve before the bushing ever touches the neck, and the bushing self-centers on the neck as the case moves up. The decapping rod rides in precise internal alignment, almost like a firing pin, which keeps neck runout to a minimum. The Competition seater uses that same captured-sleeve principle, with a seating stem so precisely fit it floats on a column of air, and the micrometer is calibrated in .001 inch increments.

Neck Sizing and Bushings on the 280 Rem Die Set

This set is designed for reloaders who have sorted their brass for neck thickness or neck-turned their cases, so it does not come with a sizing expander button. Neck sizing bushings are sold separately, which is actually a good thing: you pick the exact bushing to match your brass and desired neck tension. As a rough guide, a lot of folks run about .001 inch of tension for single-feeding a bolt gun and .002 inch when feeding from the magazine. If you shoot different brands of brass, plan on keeping a small selection of bushings on hand.

The Body Die Rounds Out the Set

The included Body Die full-length resizes the case body and bumps the shoulder for easy chambering without touching the neck. That lets you neck size after every firing and only run the body die when cases start getting tight, which cuts down on brass stress and stretches case life. Carbide size button kits and VLD seating stems are available separately if you want to tailor the setup further.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 58142
  • UPC: 611760581427
  • Caliber: 280 Remington
  • Die Set Type: Competition Bushing Neck 3-Die Set
  • Dies Included: Competition Bushing Neck Sizing Die, Body Die, Competition Seating Die
  • Neck Sizing: Interchangeable bushings in .001 inch increments (sold separately)
  • Seating Adjustment: Micrometer, calibrated in .001 inch increments
  • Expander Button: Not included (designed for sorted or neck-turned brass)
  • Thread: 7/8-14 standard press threads
  • Country of Manufacture: United States

What’s Included

  • Competition Bushing Neck Sizing Die with sliding sleeve and micrometer head
  • Body Die
  • Competition Bullet Seating Die with micrometer head
  • Die storage box
  • Instructions

Frequently Asked Questions

Does the 280 Remington Competition Bushing Neck Die Set come with bushings?

No, neck sizing bushings are sold separately. This lets you select the exact bushing size to match your brass and the neck tension you want. Redding offers bushings in .001 inch increments, so most reloaders keep a few on hand, especially if they run more than one brand of brass.

What dies are in the 280 Rem Competition Bushing Neck set?

You get three dies: a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seating Die. The neck sizer and the seater both have micrometer adjustments for repeatable neck tension and seating depth. The body die handles full-length body resizing and shoulder bump when cases start to chamber tight.

Do I need an expander button with this set?

This set is built for brass that has been sorted for neck wall thickness or neck-turned, so it does not include a sizing expander button. If you prefer to load commercial brass as-is, Redding sells carbide size button kits separately that you can add to the bushing neck die.

Will this die set work on a standard reloading press?

Yes, these dies use the standard 7/8-14 thread and fit any common single-stage or turret press. You will need the correct shellholder for the 280 Remington case head, which is sold separately.

Additional information

UPC

611760581427

Manufacturer

Manufacturer Part Number

58142

Reviews

There are no reviews yet.

Be the first to review “Redding 280 Remington Competition Bushing Neck Die Set 58142”