Description
If you load 28 Nosler and care about tight groups at distance, the L.E. Wilson Micrometer Top Bullet Seater Die is the tool that gets you there. This is a chamber-type, straight-line seater that works differently than the typical threaded die. Instead of the case riding up into the die, the case and bullet are completely captured inside the die body and held in alignment before a close-fitting seating stem pushes the bullet straight into the case mouth. That design is a big part of why these dies have a reputation for excellent concentricity and minimal runout, and why they've been a favorite among benchrest reloaders for decades.
How the 28 Nosler Micrometer Top Seater Dials In
The built-in micrometer top is the star here. It reads in .001 inch graduations with a laser-engraved scale, so you can nudge your seating depth in precise, repeatable increments without guessing. Major adjustments are handled through the 3/8 inch to 24 TPI threads in the cap, giving you both coarse and fine control over your cartridge overall length. Once you find a node your rifle likes, getting back to it is simple.
Running the Wilson Chamber-Type Die
This is a hand die built to run on an arbor press, not a conventional reloading press. You set a charged, primed case with a bullet started on the mouth, drop it into the die body, and press the seating cap down until it bottoms out. Plenty of folks reach for a K&M or similar arbor press for this setup. One of the real perks is portability: you can load bullets long, toss the die and a small press in your range bag, and fine-tune seating depth right there to chase your chamber's optimal COAL. That saves you trip after trip back to the bench.
Built to Last
The whole die is stainless steel, so it holds up to high-volume loading and won't rust out on you. It's made in the USA and carries the kind of fit and finish that precision shooters expect from the Wilson name. For the 28 Nosler handloader who wants every advantage out of a fast, flat-shooting magnum, this seater earns its spot on the bench.
Key Specifications
- Manufacturer: L.E. Wilson
- Manufacturer Part Number: S28-NOS
- UPC: 815145026293
- Caliber: 28 Nosler
- Die Type: Chamber-Type Micrometer Top Bullet Seater
- Adjustment: Built-in micrometer, .001 inch graduations
- Cap Threads: 3/8 inch – 24 TPI
- Material: Stainless Steel
- Press Compatibility: Arbor press (hand die)
- Markings: Laser engraved
- Country of Origin: Made in USA
What’s Included
- 28 Nosler micrometer top bullet seater die
- Seater base
- Allen wrench
- Instructions
Frequently Asked Questions
Does the 28 Nosler Micrometer Top Seater work on a standard reloading press?
No, this is a chamber-type hand die made to run on an arbor press. The case and bullet are captured inside the die body and you press the seating cap down until it bottoms out. It's not designed to thread into a conventional 7/8 inch to 14 press.
How precise is the seating depth adjustment on this Wilson die?
The micrometer top reads in .001 inch graduations with a laser-engraved scale, so you can fine-tune your seating depth in exact, repeatable steps. Larger adjustments are made through the 3/8 inch to 24 TPI threads in the cap. Between the two, dialing in and returning to a favorite setting is quick.
Why choose a chamber-type seater over a conventional seating die?
A chamber-type seater captures both the case and bullet and aligns them before the seating stem makes its stroke. That tighter control means better concentricity and less runout than many conventional dies deliver. It's the reason this style is a longtime favorite with benchrest and precision reloaders.
Can I take the 28 Nosler seater to the range to test loads?
Yes, and that's one of the best things about it. You can load your bullets long, bring the die and a small arbor press with you, and adjust seating depth on the spot to find your chamber's optimal COAL. It cuts down on the back-and-forth trips between the bench and the range.





Reviews
There are no reviews yet.