0
0

Lee Precision 277 SIG Fury Micrometer Bullet Seating Die

UPC: 734307923013

$27.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Reloading for the 277 SIG Fury means working with a serious high-pressure round, and seating depth consistency is where a lot of accuracy is won or lost. Lee's Precision Micrometer Bullet Seating Die gives you fine, repeatable control over how deep your bullets sit, reading in increments of one thousandth of an inch so you can tune your loads and get right back to your setting after a caliber change or a cleaning.

What Sets the 277 SIG Fury Micrometer Seating Die Apart

The laser-engraved micrometer thimble and body read just like a precision depth micrometer, and the adjustment is infinitely tunable with smooth, click-free movement. When run as a dead length seating die, the body contacts the shell holder to lock in uniform seating depth every single time. That combination makes it easy to record a load and come back to it later without guesswork.

Runout Control on Your 277 SIG Fury Rounds

At the heart of this die is a floating bullet guide that holds the case mouth and bullet in perfect alignment. The guide is built with radial clearance so the case, guide, and seater screw all self-center before the bullet ever starts moving into the neck. Lee's testing shows the sliding guide design produces cartridges with some of the least bullet runout out there, which translates to straighter ammo and tighter groups downrange. The seating stem itself is machined and burnished to handle nearly any point-style bullet without scratching or marking the tip.

Fitting It Into Your 277 SIG Fury Setup

This is the standalone seating die (part number 92301), the same micrometer seater found in Lee's 277 SIG Fury die sets. It threads into any standard 7/8-14 press, so it drops right into whatever single-stage or turret setup you already run. Keep in mind that SIG's hybrid-case factory Fury ammo is not reloadable, so this die is meant for conventional brass. Pair it with a sizing die and you have a precision seating solution for building accurate 277 SIG Fury rounds at home.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 92301
  • UPC: 734307923013
  • Cartridge: 277 SIG Fury
  • Die Style: Micrometer Bullet Seating Die
  • Die Type: Dead Length Seating
  • Micrometer Graduations: 0.001 inch
  • Thread Size: 7/8-14
  • Bullet Guide: Floating, self-aligning
  • Material: Steel
  • Country of Origin: USA

What’s Included

  • 277 SIG Fury Precision Micrometer Bullet Seating Die
  • Instructions

Frequently Asked Questions

Is this the full die set or just the seating die?

This is the standalone micrometer bullet seating die, part number 92301, on its own. It's the same seater Lee includes in their 277 SIG Fury die sets, so it's a great add-on if you already have a sizing die or want to upgrade to micrometer seating. You'll need a separate sizing die to complete your reloading process.

What does the micrometer on this 277 SIG Fury seating die actually do?

The laser-engraved micrometer thimble lets you adjust seating depth in increments of one thousandth of an inch and read it just like a depth micrometer. That means you can record a setting, change calibers or break the die down for cleaning, and dial right back to the exact same depth later. It takes the trial and error out of repeating a proven load.

Will this die work in my press?

Yes, it uses the standard 7/8-14 thread found on virtually all common reloading presses. It drops into single-stage, turret, and progressive setups without any special adapters. Just thread it in, set your depth, and go.

Can I reload factory SIG Fury ammo with this?

The hybrid-case factory 277 SIG Fury ammunition that uses the steel base is not reloadable, so this die is intended for conventional reloadable brass. Once you have proper brass, the micrometer seater handles the bullet seating step with excellent depth control and low runout.

Additional information

UPC

734307923013

Manufacturer

Manufacturer Part Number

92301

Reviews

There are no reviews yet.

Be the first to review “Lee Precision 277 SIG Fury Micrometer Bullet Seating Die”