0
0

Forster 277 Fury Ultra Micrometer Seater Die (U00069)

UPC: 757253990786

$118.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you handload the 277 Sig Fury and chase the kind of consistency that shows up on paper, the Forster Ultra Micrometer Seater Die earns its spot on the bench. It takes the proven Bench Rest seater design and adds a precision micrometer head up top, so you can set and repeat your bullet seating depth without the guesswork.

The heart of this die is a spring-loaded sliding chamber sleeve that fully captures the case before the bullet ever starts to move. That keeps the case, bullet, and seating stem on a common axis through the whole stroke, which is what gives you low runout and straight-line seating round after round. The concentric bullet channel runs just a hair larger than bullet diameter, and the hand-polished stem contacts the ogive well back from the tip so soft points and ballistic tips don't get marred.

Why the 277 Fury Micrometer Head Matters

The micrometer head is marked in .001 inch increments, and with the spacing between marks you can nudge seating depth in either direction by even finer amounts, down around .0005 inch. Each full turn moves the stem .025 inch. The sharp white markings are easy to read and record, so once you find the node your rifle likes, you can come right back to it on the next loading session. There's a center zero reference too, which makes calculating a little more or less jump simple.

Fitting the 277 Fury Seater Die to Your Press

This die wears Forster's Cross Bolt Lock Ring, which clamps the split ring closed rather than digging a set screw into the die threads. It drops right into a Forster Co-Ax press with no shellholder needed, and it threads into any standard 7/8-14 press as well, where you'll use the shellholder your press maker recommends. Worth noting for the 277 Fury crowd: this is a non-crimping seater, so if your gas gun loads need a crimp, plan on adding a separate taper or roll crimp die. Like the rest of the Forster line, it's machined from quality steel to tight tolerances and made in the U.S.A.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: U00069
  • UPC: 757253990786
  • Cartridge: 277 Sig Fury
  • Die Type: Ultra Micrometer Bench Rest Seater Die
  • Micrometer Adjustment: 0.001 inch increments (finer down to ~0.0005 inch)
  • Per Micrometer Revolution: 0.025 inch
  • Crimp Feature: Non-crimping seater
  • Lock Ring: Forster Cross Bolt Die Lock Ring
  • Thread: 7/8-14
  • Country of Origin: Made in the U.S.A.

What’s Included

  • One Forster Bench Rest Ultra Micrometer Seater Die
  • One hand-polished seating stem
  • Forster split-type Cross Bolt lock ring
  • Complete instructions
  • Die storage box

Frequently Asked Questions

Does the 277 Fury Ultra Micrometer Seater Die crimp the case?

No, this is a non-crimping seater. It's built to seat bullets with match-grade alignment and precise depth control, not to apply a crimp. If your loads need a crimp, you'll want to add a separate taper or roll crimp die.

How fine can I adjust seating depth with the micrometer head?

The micrometer is marked in .001 inch increments, and the spacing between marks lets you make finer adjustments down to roughly .0005 inch in either direction. Each full revolution of the head moves the stem .025 inch. The sharp white markings make it easy to record a setting and return to it later.

Do I need a shellholder to use this die?

It depends on your press. If you're running a Forster Co-Ax press, no shellholder is required. In any standard 7/8-14 press, you'll use the shellholder recommended by your press manufacturer, which is sold separately.

What makes the Ultra Micrometer version different from the standard Bench Rest Seater Die?

Both share the same sliding chamber sleeve that captures the case for straight-line seating. The Ultra Micrometer version adds a precision micrometer head on top, letting you dial in exact, repeatable seating depth without the trial and error of a standard stem.

Additional information

UPC

757253990786

Manufacturer

Manufacturer Part Number

U00069

Reviews

There are no reviews yet.

Be the first to review “Forster 277 Fury Ultra Micrometer Seater Die (U00069)”