$79.20
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The L.E. Wilson Chamber Type Bullet Seater for .270 Winchester is one of those tools that reloaders reach for when accuracy matters more than speed. Instead of relying on a threaded body and a sliding sleeve like a conventional seater, this die uses a chamber-style cavity that mimics your rifle's chamber. The case and bullet are fully captured and aligned before anything moves, and then a close-fitting seating stem pushes the bullet straight into the neck. The result is dead-straight seating with the kind of runout numbers that make benchrest and precision folks grin.
This is a hand die, meant to be run with an arbor press or a soft mallet rather than threaded into a conventional reloading press. You drop a charged, primed case with a bullet balanced on the mouth into the die, set it on the included base, and press the cap down until it bottoms out. There's really only one moving part during the seating stroke, which is a big part of why these stay so consistent round after round. Seating depth is adjusted with the screw in the cap, running on 3/8-24 threads for fine control.
Wilson machines these from solid bar stock rather than casting them, and each seater is hand reamed to the correct headspace so tolerances stay tight. These benchrest quality dies have been trusted by competitive shooters for generations, and they've found their way into F-Class, PRS, High Power, and plenty of hunting benches too. The included seater base lifts the round up off the press plate so the primer never rests against a hard surface, which is a small but smart touch.
If you shoot a .270 Win and you've been chasing better groups through handloading, upgrading your seating step is one of the highest-payoff moves you can make. Made in the U.S.A.
No, this is a chamber type hand die designed to run with an arbor press or a soft mallet. It does not thread into a conventional 7/8-14 press like a standard seating die. That hand-die design is exactly what lets it hold such tight alignment and produce low runout ammo.
This is the standard chamber type seater, so seating depth is set with the adjustment screw inside the cap on 3/8-24 threads rather than a micrometer dial. It still gives you precise, repeatable depth control once dialed in. If you want click-by-click .001 inch adjustments, L.E. Wilson offers a separate stainless micrometer version for the .270 Win.
The chamber cavity captures both the case and the bullet and aligns them before any seating happens, then a close-fitting stem pushes the bullet straight down. There is essentially one moving part during the stroke, so there's very little room for the bullet to tilt or rock. That translates to straighter ammo and tighter groups at distance.
The die ships with the chamber type bullet seater itself, a seater base, and instructions. The base lifts the cartridge off the arbor press plate so the primer never rests against a solid surface during seating. You'll want an arbor press to go along with it for the best results.
| UPC | 815145021342 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BS27-WIN |
You must be logged in to post a review.
Reviews
There are no reviews yet.