Description
The Redding 270 Caliber Stainless Pilot Stop is one of those small reloading pieces that quietly makes a big difference on the bench. Machined from stainless steel using a CNC process, it's purpose-built to pair with the Redding Case Neck Gauge and the Redding Flash Hole Deburring tools. This one is sized for .270 and 6.8mm cases (.277 bullet diameter) and rides on the standard 3/16" mandrel.
What sets these pilot stops apart is the shape. They're designed to seat properly against new and resized case necks, and the slightly undercut profile is the secret sauce. Instead of catching on little dings or the natural step at the case mouth and neck-shoulder junction, the undercut lets the pilot slide right past those imperfections. The result is a smooth, consistent reading on your dial indicator every time you run a case through the gauge.
Where the 270 Caliber Pilot Stop Earns Its Keep
If you're chasing concentricity and consistent neck measurements for your .270 Winchester brass, this is the piece that lets your Case Neck Gauge do its job right. Accurate indicator readings start with the pilot making clean contact, and the stainless construction holds its dimensions trip after trip. It's a set-it-and-forget-it kind of tool that just works.
Fitment Notes for the 270 Stainless Pilot Stop
This model is the larger standard size built around the 3/16" mandrel. Redding offers a smaller 9/64" mandrel version for the little calibers like .17 and .20, so if you're setting up for multiple cartridges it's worth knowing which mandrel your gauge runs. The bonus here is that the 3/16" standard size also plays nicely with case neck tools from other manufacturers, so you're not locked into one brand's ecosystem. For anyone who takes brass prep seriously, it's a worthwhile addition to the kit.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 06127
- UPC: 611760061271
- Caliber/Gauge: .270 / 6.8mm (.277)
- Mandrel Size: 3/16" Standard
- Material: CNC Machined Stainless Steel
- Profile: Undercut Shape
- Fits: Redding Case Neck Gauge & Flash Hole Deburring Tools
- Country of Manufacture: United States
What’s Included
- 270 Caliber Stainless Pilot Stop (3/16" mandrel)
Frequently Asked Questions
What does the 270 caliber pilot stop work with?
It's designed to pair with the Redding Case Neck Gauge and the Redding Flash Hole Deburring tools. Because it uses the standard 3/16" mandrel, it also works well with comparable case neck tools from other manufacturers. That makes it a flexible pick if you run more than one brand of brass prep gear.
Which cases fit this 270 stainless pilot stop?
This pilot stop is sized for .270 and 6.8mm cartridges that use a .277 diameter bullet, including the popular .270 Winchester. It seats against both new and resized case necks. If you shoot or load .270, this is the matching size for your gauge.
Why does the undercut shape matter on the pilot stop?
The slightly undercut profile keeps the pilot from catching on small imperfections at the case mouth or the neck-shoulder junction. That means it slides cleanly into position and gives you smooth, repeatable readings on your dial indicator. It's a small design detail that pays off in measurement consistency.
Is this the 3/16" or 9/64" mandrel version?
This is the larger standard size built for the 3/16" mandrel. Redding makes a separate smaller 9/64" version for calibers like .17 and .20 and for cases with small flash holes. Check which mandrel your Case Neck Gauge uses before ordering.




Reviews
There are no reviews yet.